Exterior walls shall be of materials permitted by the building type of construction....
Search Results "Fire-Building Surface"
Commonly Searched Documents
-
704.4 Materials
-
§ 36.404(a)(2)(i)
(i) A building housing five or more sales or rental establishments; or...
-
Sec.36.404(a)(2)(i)
(i) A building housing five or more sales or rental establishments; or...
-
Accessible
Describes a site, building, facility, or portion thereof that complies with these guidelines....
-
Multifamily Dwelling
Any building containing more than two dwelling units....
-
Addition
An expansion, extension, or increase in the gross floor area of a building or facility....
-
ADDITION
An expansion, extension, or increase in the gross floor area of a building or facility....
-
MULTIFAMILY DWELLING
Any building containing more than two dwelling units....
-
4.1.6(4)
(4) Special technical provisions for alterations to existing buildings or facilities:...
-
RAMP
A walking surface that has a running slope steeper than one unit vertical in 20 units horizontal (5-percent slope)....
-
R305.1 General
Detectable warning surfaces shall consist of truncated domes aligned in a square or radial grid pattern and shall comply with R305....
-
1005.3.1 Curb or Barrier
Curbs or barriers shall extend 2 inches (51 mm) minimum above the surface of the fishing pier or platform....
-
4.9.4(5)
(5) Top of handrail gripping surface shall be mounted between 34 in and 38 in (865 mm and 965 mm) above stair nosings....
-
4.15.2* Spout Height
Spouts shall be no higher than 36 in (915 mm), measured from the floor or ground surfaces to the spout outlet (see Fig. 27(a))....
-
4.19.6* MIRRORS
Mirrors shall be mounted with the bottom edge of the reflecting surface no higher than 40 in (1015 mm) from the floor (see Fig. 31)....
-
Road Roughness Analysis
Serviceability is a criterion measure for highway surfaces based on surface roughness, which is then used as a determinant need for rehabilitation of highway surfaces....
- Yale YSSL10 Auxiliary Latch
- Inpro Corporation IPC® 940 Smooth Handrail with Reveal
- Garaventa Artira Inclined Platform Wheelchair Lift
-
603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1015 mm) maximum above the finish floor or ground....
-
402 Accessible Routes
Section 402 lists the various elements that can be part of an accessible route: walking surfaces, doorways, ramps, elevators, and platform lifts....
-
603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1015 mm) maximum above the finish floor or ground....
-
903.4 Back Support
Back support shall be 42 inches (1065 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (455 mm) minimum above the seat...
-
11B-603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1016 mm) maximum above the finish floor or ground....