Key requirements apply to clear floor area, knee and toe clearances, maneuvering clearances, reach limits, grip force requirements and door usability factors....
Search Results "Technical Requirement"
-
Executive Summary
-
II-6.5000 Alterations to historic properties
What are the alternative requirements? The alternative requirements for historic buildings or facilities provide a minimal level of access....
-
Section 35.151(f) Housing at a place of education
In addition, the residential facilities standards do not require accessible roll-in showers in bathrooms, while the transient lodging requirements require some of the accessible units to...
-
Do access aisle borders (in blue) have to be painted on all four sides to be considered compliant?
I would also say that both of the "end" lines would/could be within the required length. ...
-
Section 36.308 Seating in Assembly Areas (Preamble, Section-by-Section Analysis)
These communications requirements are the focus of other provisions of the regulation (see §§ 36.303–36.304)....
-
M303.2.4 Equipment Clearances (Section-by-Section Analysis)
The proposed requirements for equipment clearances paralleled the knee and toe clearance requirements from the 2004 ADA and ABA Accessibility Guidelines....
-
Section 36.308 Seating in Assembly Areas (Section-By-Section Analysis and Response to Comments)
These communications requirements are the focus of other provisions of the regulation (see Sec..36.303 - 36.304)....
-
b. A Qualified Person with a Disability
can include minimum age limits or height requirements (such as the age at which a person can first legally drive a car or height requirements to ride a particular roller coaster at a county...
-
11B-216.10 Assistive listening systems
Note that a tactile sign is not required by this section. ◼ [2010 ADAS] 216.10 Assistive Listening Systems. ...
-
11B-206 Accessible routes
The code does not require more than one entrance with these features. 1. The protected accessible entrance is not required to be the primary entrance to the facility. 2....
-
Alterations and Additions [F245.2.3]
When altering or adding picnic units to an existing picnic facility, the scoping requirements apply only to the picnic units that are altered or added until the required minimum number of...
-
11B-604.5 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped grab bar meeting the dimensional requirements of Sections 11B-604.5.1 and 11B-604.5.2 shall...
-
III-3.1000 General
Several broad principles underlie the nondiscrimination requirements of title III....
-
11B-216.10 Assistive listening systems
Note that a tactile sign is not required by this section. ◼ [2010 ADAS] 216.10 Assistive Listening Systems. ...
-
10) Assembly areas
The number of wheelchair locations required depends upon the size of the assembly area. When the area has over 300 seats, there are requirements for dispersal of wheelchair seating....
-
11B-216.10 Assistive listening systems
It is helpful, though not required, to identify the location or person to contact for obtaining the system on the sign....
-
Training
Other foreign carriers objected to training their employees to meet U.S. requirements, since they already trained their personnel to meet applicable requirements of their home countries....
-
§35.105 Self-evaluation
required by this section....
-
Dwelling Unit
The Fair Housing Act requires all covered multifamily dwellings for first occupancy after March 13, 1991 to be designed and constructed in accordance with the Act's accessibility requirements...
-
§35.105 Self-evaluation (Section-by-Section Analysis)
required by this section....
-
III-5.1000 General
This requirement, along with the requirement for accessible alterations, are the only requirements that apply to commercial facilities. What is "readily accessible and usable"?...
-
1630.16(b)(3)
(3) May require that all employees behave in conformance with the requirements established under the Drug-Free Workplace Act of 1988 (41 U.S.C. 701 et seq.);...
-
§382.133(e)(1)
(1) Any applicable requirement for a manufacturer-affixed label to reflect that the device has been tested to meet applicable FAA requirements for medical portable electronic devices;...
-
232.4 Medical Care Facilities
Patient bedrooms or cells required to comply with 223 shall be provided in addition to any medical isolation cells required to comply with 232.3....