Section 209.2.1 covers scoping requirements in the current ADA Standards for passenger loading zones.
Search Results "Clear Deck Space"
Filters
Commonly Searched Documents
-
Passenger Loading Zones: ADA Standard Section 209.2.1
-
1009.6 Areas of refuge
Every required area of refuge shall be accessible from the space it serves by an accessible means of egress....
-
502.3.4 Location
Access aisles shall be permitted to be placed on either side of the parking space except for angled van parking spaces which shall have access aisles located on the passenger side of the...
-
502.3.4 Location
Access aisles shall be permitted to be placed on either side of the parking space except for angled van parking spaces which shall have access aisles located on the passenger side of the...
-
11B-502.6.4.2
The parking space shall be outlined or painted blue and shall be marked with an International Symbol of Accessibility complying with Section 11B-703.7.2.1 a minimum 36 inches wide by 36...
-
Parking
The chart below indicates the number of accessible spaces required by the 2010 Standards. One of every six spaces must be van accessible....
-
4.1.1(5)
(5) (a) If parking spaces are provided for employees or visitors, or both, then accessible spaces, complying with 4.6, shall be provided in each such parking area in conformance with the...
-
B. The ADA Standards for Accessible Design
The ADA Standards do not address, however, every conceivable disability impact in a physical space....
-
902 Dining Surfaces and Work Surfaces
Clear floor space is required for a forward approach (902.2), and a surface height of 28 to 34 inches is specified (902.3)....
-
Summary of Major Provisions
They are transported on a single transport vehicle over roadways, which results in size and space limitations....
-
Value Contrast (slide 9)
Furniture and open spaces There are so many cases of dark furniture on dark carpeting or on patterned floors, and also white leather furniture on white or very light floors....
-
11B-604.5.2 Rear wall
The rear grab bar shall be permitted to be 24 inches (610 mm) long minimum, centered on the water closet, where wall space does not permit a length of 36 inches (914 mm) minimum due to the...
-
11B-604.5.2 Rear wall
Exceptions: The rear grab bar shall be permitted to be 24 inches (610 mm) long minimum, centered on the water closet, where wall space does not permit a length of 36 inches (914 mm...
-
3.1 Canton Tinseltown 15, 4720 Mega Street NW North Canton, Ohio
the auditorium (away from the screen) where four (4) wheelchair spaces are currently located...
-
11B-707.3 Operable parts
Unless a clear or correct key is provided, each operable part shall be able to be differentiated by sound or touch, without activation....
-
§382.57(c)(6)(iv)(B) Tactile symbols
Function key surfaces must have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
-
608.2.3 Alternate Roll-In Type Shower Compartments
Alternate roll-in type shower compartments shall be 36 inches (915 mm) wide and 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides....
-
§27.71(k)(6)(iv)(B) Tactile symbols.
Function key surfaces must have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
-
§ 27.71(k)(6)(iv)(B) Tactile symbols
Function key surfaces must have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
-
§ 382.57(c)(6)(iv)(B) Tactile symbols
Function key surfaces must have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
-
707.6.3.2 Tactile Symbols
Function key surfaces shall have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
-
§ 38.159(c)(2) Ramp surface
The ramp surface shall be continuous and slip resistant; shall not have protrusions from the surface greater than 1/4 inch (6.5 mm) high; shall have a clear width of 30 inches (760 mm);...
-
11B-608.2.3 Alternate roll-in type shower compartments
Alternate roll-in type shower compartments shall be 36 inches (914 mm) wide and 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides....
-
Parking Signage
Under the first exception, accessible spaces in lots with four or fewer spaces are not required to be identified as accessible (i.e., reserved solely for use by people with disabilities)...