Rough surfaces composed of cobblestones, Belgian blocks, and similar materials can be difficult and sometimes painful to negotiate with wheeled mobility aids due to the vibrations they cause...
Search Results "Wheel Stop"
-
Surface Smoothness
-
5.1.2 Transfer Surface High Height Recommendations for M301 and M302
Rationale for final recommendation The anthropometric data referenced above in the Wheeled Mobility Anthropometry Project shows seat heights for people who use mobility devices are above...
-
Summary
Summary The following report provides a brief analysis of four anthropometric dimensions which were considered relevant to the width and depth dimensions of a seating surface for wheeled...
-
Detectable Warning Surfaces on Boarding Platforms Used by Buses and Rail Vehicles, and Boarding and Alighting Areas Used by Rail Vehicles (Section-by-Section Analysis)
ADAAG and 2004 ADA and ABA Accessibility Guidelines contain a requirement for detectable warning surfaces on rail platforms.32 The proposed guidelines adapt this requirement to transit stops...
-
2. Benefits: Qualitative Summary of Benefits
The most significant benefits from the 2016 Non-Rail Vehicle Guidelines are expected to flow from the automated stop and route announcement systems requirement....
-
5.8.2 Knee and Toe Clearance Recommendations under Breast Platform Recommendations
The alternative dimensions recommended by Wheeled Mobility Anthropometry Project are below in the last column of the table....
-
4.3.3 Clear Floor Area
Long Description: This data provides the minimum dimensions for the rectangular floor area required by occupied wheeled mobility devices (i.e., with the occupant seated in their own wheeled...
-
How to: adjust your parking brakes
The parking brakes on the Freedom Chair are adjustable to accommodate a range of riding conditions and even different wheels....
-
§ 37.167(b)(2)
(2) The entity shall announce any stop on request of an individual with a disability....
-
Section 37.167 Other Service Requirements
On fixed route systems, the entity must announce stops. These stops include transfer points with other fixed routes....
-
10.3.1(13)
the route surface shall be level and flush with the rail top at the outer edge and between rails, except for a maximum 2‒1/2 inch gap on the inner edge of each rail to permit passage of wheel...
-
Surfaces for Outdoor Recreation Access Routes
(Bicycle tires are similar to the large rear wheels of a wheelchair.)...
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
T704.3 Automated Announcement Systems
Automated systems for stop announcements and route identification announcements shall comply with T704.3....
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
810.6.3 Station Names
It is also important to place signs at intervals in the station where passengers in the vehicle will be able to see a sign when the vehicle is either stopped at the station or about to come...
-
810.6.3 Station Names
It is also important to place signs at intervals in the station where passengers in the vehicle will be able to see a sign when the vehicle is either stopped at the station or about to come...
-
Individuals with Cognitive Limitations
Stopping times may be increased because of an increase in the time required to understand and interpret the stopping cue....
-
§ 37.201(a)
(a) Whenever an OTRB makes an intermediate or rest stop, a passenger with a disability, including an individual using a wheelchair, shall be permitted to leave and return to the bus on the...
-
4.3.5.1 90-Degree Turn
Long Description: This data depicts the amount of space required by users of wheeled mobility devices to perform a 90-degree turn ("L-Turn")....
