Wheelchair means a mobility aid belonging to any class of three- or more-wheeled devices, usable indoors, designed or modified for and used by individuals with mobility impairments, whether...
Search Results "Wheel Stop"
-
§ 37.3 Wheelchair
-
810.10 Track Crossings
EXCEPTION: Openings for wheel flanges shall be permitted to be 2 1/2 inches (64 mm) maximum....
-
11B-810.10 Track crossings
Exception: Openings for wheel flanges shall be permitted to be 2½ inches (64 mm) maximum....
-
11B-810.10 Track crossings
Exception: Openings for wheel flanges shall be permitted to be 2½ inches (64 mm) maximum....
-
1012.2 Recreational Vehicles
Recreational vehicles equipped with a lift need an additional 8 feet of space on the passenger’s side to deploy the lift and for individuals who use wheeled mobility devices to maneuver...
-
4.3.5.2 180-degree turn
Long Description: This data depicts the amount of space required by users of wheeled mobility devices to perform a 180-degree turn....
-
Section 37.3 Definitions
While some mobility devices may not look like many persons' traditional idea of a wheelchair, three- and more-wheeled devices, of many varied designs, are used by individuals with disabilities...
-
17 Inch Low Height
with disabilities, including people who use wheeled mobility devices....
-
11B-810.4 Bus signs
Exception: Bus schedules, timetables and maps that are posted at the bus stop or bus bay shall not be required to comply....
-
DRIVE-UP ELECTRIC VEHICLE CHARGING STATION
An electric vehicle charging station in which use is limited to 30 minutes maximum and is provided at a location where the electric vehicle approaches in the forward direction, stops in...
-
11B-810.4 Bus signs
Exception: Bus schedules, timetables and maps that are posted at the bus stop or bus bay shall not be required to comply....
-
DRIVE-UP ELECTRIC VEHICLE CHARGING STATION
An electric vehicle charging station in which use is limited to 30 minutes maximum and is provided at a location where the electric vehicle approaches in the forward direction, stops in...
-
§382.91(b)(2)
(2) This requirement also includes a brief stop upon the passenger's request at the entrance to a rest room (including an accessible rest room when requested)....
-
Horizontal Alignment
For example, using the 85th percentile stopping distance, the minimum offset required for a 15.8-m (50-ft) radius curve would be 3.4 m (11 ft)....
-
Summary of Significant Changes
Announcement Systems on Large Fixed Route Buses Operated by Large Transit Entities: Large transit entities are required under the 2016 Non-Rail Vehicle Guidelines to provide automated stop...
-
810.10 Track Crossings
EXCEPTION: Openings for wheel flanges shall be permitted to be 2½ inches (64 mm) maximum. Figure 810.10 (Exception) Track Crossings...
-
Notes:
Final Report: Anthropometry of Wheeled Mobility Project. Prepared for the U.S. Access Board. IDeA Center, Buffalo, NY....
-
11B-407.2.1.4 Location
A destination-oriented elevator system provides lobby controls enabling passengers to select floor stops, lobby indicators designating which elevator to use, and a car indicator designating...
-
11B-407.2.1.4 Location
A destination-oriented elevator system provides lobby controls enabling passengers to select floor stops, lobby indicators designating which elevator to use, and a car indicator designating...
-
AVAILABLE DATA DO NOT SUPPORT DEPARTING FROM THE CURRENTLY ACCEPTED STANDARD OF 19-INCH TRANSFER SURFACE HEIGHT
The AWM Project measured the rear compressed seat height of the wheeled mobility device with the user seated in it....
-
Limitations
Vibrations that WC users feel and perceive can be affected by a number of factors including the speed they travel, wheel type, wheel size, wheel base, suspension type, cushion type, etc....
-
T215.4 Automated Announcement Systems
Large non-rail vehicles operated in fixed route service with multiple designated stops by large transit entities shall provide automated stop announcement systems and automated route identification...
-
11B-810.10 Track crossings
Exception: Openings for wheel flanges shall be permitted to be 2½ inches (64 mm) maximum. FIGURE 11B-810.10 (EXCEPTION) TRACK CROSSINGS...
-
810.10 Track Crossings
EXCEPTION: Openings for wheel flanges shall be permitted to be 2½ inches (64 mm) maximum. Figure 810.10 (Exception) Track Crossings...