Special care is needed when measuring the clear opening of a doorway. To measure the clear opening of a standard hinged door, open the door to 90 degrees....
Search Results "Side-Opening Door"
-
Measuring Door Openings
-
Sargent 1130 Series Door Closer
A reversible "Non-handed" Economy Aluminum Door Closer....
-
Norton Surface Mounted Medium Duty 8000 Series Door Closer
The 8000 Series Door Closers offer the ideal combination of appearance, reliability and durability in today's market....
-
Revolving Doors or Turnstiles
A commenter advised that no revolving doors or turnstiles should be permitted on an accessible route. Response....
-
BEA Inc. LZR Microscan Installation Video
The LZR-microscan is the next generation sensor system for swing door safety. ...
-
Doors at Entrances to Businesses
However, some older doors are less than 36 inches wide and may not provide enough width (32 inch clear width when fully opened). Door openings can sometimes be enlarged....
-
1010.1.6 Thresholds
or landing for other doors....
-
1010.1.6 Thresholds
or landing for other doors....
-
T302.3 Openings
Openings in walking surfaces shall not allow the passage of a sphere more than 5/8 inch (16 mm) in diameter....
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
Maneuvering Clearances at Doors [4.13.6]
Maneuvering Clearances at Doors [4.13.6] Pull-side clearance beyond the door swing provides space for a forward reach to door hardware....
-
Sides of Curb Ramps
Section 406.3 addresses the sides of curb ramps and specifies that side flares, where provided, have a slope of 1:10 maximum....
-
Doors and Gates in Series [§404.2.6]
Doors and Gates in Series [§404.2.6] At hinged or pivoted doors or gates in series, a separation is required that is at least 48” plus the width of doors or gates swinging into the space...
-
Stanley Hardware 8179 Light Commercial Door Closer
Product Overview Used on doors with a maximum weight of 185lbs and is UL listed Adjustable closing and latching speed Reversible for left or right swing Includes tri-pack hardware...
-
Sargent 1331 Series Aluminum Door Closer
The SARGENT 1331 Series door closer can be used for the most common applications and is a Grade 1 fully adjustable closer....
-
Norton Surface Mounted 2800ST Cam Action Closer
These door closers come standard with adjustable sweep speed and latch speed, closing control and adjustable backcheck cushioning in the opening cycle....
-
DORMA BTS80 EMB Series Door Closer
, or tempered glass door applications....
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
Yale 3000 Series Architectural Door Closer
The Yale® 3000 Series Architectural Door Closers offer the perfect combination of reliability, appearance and durability in today’s market. ...
-
Hager Companies 5200 Series - Heavy Duty Door Closer
The 5200 Series Closers are constructed of aluminum alloy to be installed on exterior and interior doors. They are designed and engineered for reliability and superior performance....
-
11B-404.3 Automatic and power-assisted doors and gates
Automatic and power-assisted doors are often used by designers to provide accessibility when door closer pressure would exceed the allowable opening force for interior or exterior doors....
-
11B-404.3 Automatic and power-assisted doors and gates
Automatic and power-assisted doors are often used by designers to provide accessibility when door closer pressure would exceed the allowable opening force for interior or exterior doors....
-
1132A.1 Primary entry doors and required exit doors
The width and height of primary entry doors and all required exit doors shall comply with Section 1126A.1....
