The side wall grab bar shall be 42 inches (1067 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1372 mm) minimum from the rear wall with...
Search Results "Side-Opening Door"
-
11B-604.5.1 Side wall
-
11B-604.5.1 Side wall
The side wall grab bar shall be 42 inches (1067 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1372 mm) minimum from the rear wall with...
-
Corbin Russwin Inc. DC62900 Series Electromechanical Closer-Holder
The track is mounted to the frame face for pull side installations or the frame soffit for push side installations....
-
11B-809.8.3 Door maneuvering clearance.
At the dwelling unit side of the primary entry doors, secondary exterior doors, and required exit doors maneuvering clearances shall be 44 inches (1118 mm) minimum in length measured...
-
604.8.2.2 Doors
604.8.2.2 Doors....
-
Allegion Falcon SC90 Series Surface Mounted Door Control
Specifications Meets ANSI A117.1 ANSI/BHMA A156.4, Grade 3 UL Listed Closer mounts hinge side, top jamb or parallel arm when either the Rw/PA or Hw/PA arm...
-
604.8.2.2 Doors
Toilet compartment doors, including door hardware, shall comply with 404, except that if the approach is to the latch side of the compartment door, clearance between the door side of the...
-
604.8.2.2 Doors
Toilet compartment doors, including door hardware, shall comply with 404, except that if the approach is to the latch side of the compartment door, clearance between the door side of the...
-
308.3 Side Reach
308.3 Side Reach...
-
308.3 Side Reach
308.3 Side Reach....
-
308.3 Side Reach
308.3 Side Reach....
-
4.6.7 Openings
Openings in the clear floor or ground space surface shall not allow passage of a sphere more than 1/2 inch (13 mm) diameter....
-
Figure 404.2.4.1(e) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Pull Side – Drawing from the U.S. Access Board
-
Figure 404.2.4.1(f) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Push Side – Drawing from the U.S. Access Board
-
Figure 404.2.4.1(h) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Pull Side – Drawing from the U.S. Access Board
-
Figure 404.2.4.1(j) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Push Side – Drawing from the U.S. Access Board
-
Figure 404.2.4.1(d) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Pull Side – Drawing from the U.S. Access Board
-
Corbin Russwin Inc. DC8000 Series Heavy-Duty Door Closer
The Grade 1 DC8000 Series door closer is the perfect choice for high-use openings that must meet ADA requirements....
-
404.2.7 Door and Gate Hardware
Handles, pulls, latches, locks, and other operable parts on doors and gates shall comply with 309.4....
-
Allegion Falcon SC60 Series Surface Mounted Door Closer
Specifications Meets ANSI A117.1 ANSI/BHMA A156.4, Grade 1 UL Listed 1 3/8" diameter piston Closer mounts hinge side, top jamb or parallel arm...
-
Automatic Doors
Provisions in section 404.3 address clear width; maneuvering clearance; thresholds; doors and gates in series; operable parts; break out opening; and revolving doors, gates, and turnstiles...
-
3.3.15.2 Side (lateral) reach - unobstructed
3.3.15.2 Side (lateral) reach - unobstructed For WhMD users in our study that could perform a reach task, over 90% of each of the WhMD user groups could reach beyond the lateral most...
-
Sargent 1130 Series Door Closer
A reversible "Non-handed" Economy Aluminum Door Closer....
-
Norton Surface Mounted Medium Duty 8000 Series Door Closer
The 8000 Series Door Closers offer the ideal combination of appearance, reliability and durability in today's market....
