Edges shall be eased or rounded at 1/16 inch (1.59 mm) minimum, or chamfered at 1/8 inch (3.2 mm) maximum. Vertices shall be radiused between 1/8 inch (3.2 mm) minimum and ΒΌ inch...
Search Results "Informational Signage"
-
11B-703.7.2.6.4 Edges and vertices on geometric symbols
-
Access Board: Tactile Sign Height
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
11B-502.6.2 Minimum fine
Additional language or an additional sign below the International Symbol of Accessibility shall state βMinimum Fine $250.β
-
11B-502.6.4 Marking
Each accessible car and van space shall have surface identification complying with either Section 11B-502.6.4.1 or 11B-502.6.4.2.
-
11B-502.6.2 Minimum fine
Additional language or an additional sign below the International Symbol of Accessibility shall state βMinimum Fine $250.β
-
11B-502.6.4 Marking
Each accessible car and van space shall have surface identification complying with either Section 11B-502.6.4.1 or 11B-502.6.4.2. Β
-
11B-502.6.4 Marking
Each accessible car and van space shall have surface identification complying with either Section 11B-502.6.4.1 or 11B-502.6.4.2.
-
11B-502.6.2 Minimum fine
Additional language or an additional sign below the International Symbol of Accessibility shall state βMinimum Fine $250.β
-
11B-216.9 TTYs
ETA Editor's Note The ADA requirements included at Section 11B-216.9 are provided for information only....
-
Van Accessible Signage
Comment. The proposed rule removed a requirement that the access designation for van parking include the term "van accessible" to clarify that both car and van drivers can use such...
-
Van Accessible Signage
Comment. The proposed rule removed a requirement that the access designation for van parking include the term "van accessible" to clarify that both car and van drivers can use such...
-
1009.9 Signage
Signage indicating special accessibility provisions shall be provided as shown: Each door providing access to an area of refuge from an adjacent floor area shall be identified by a...
-
11B-216.8.1 Geometric symbols
Geometric symbols complying with Section 11B-703.7.2.6 shall be provided at entrances to toilet and bathing rooms. Exceptions: Geometric symbols shall not be required at...
-
11B-216.8.1 Geometric symbols
Geometric symbols complying with Section 11B-703.7.2.6 shall be provided at entrances to toilet and bathing rooms. Exceptions: Geometric symbols shall not be required at...
-
11B-216.9.2 Directional signs
ETA Editor's Note The ADA requirements included at Section 11B-216.9 are provided for information only....
-
A. Signs
A. If signs are provided for the following spaces, are the signs mounted on the wall (not the door) to the latch side of the door and centered 60" above the floor so that they can be...
-
Signs
Signs that provide direction to, or information about, functional spaces (Β§ 4.1.3(16)(b)) must comply with requirements for: Character proportion (Β§ 4.30.2); Character height...
-
Directional Signs: ADA Standard Section 216.4.3
Section 216.4.3 covers scoping requirements in the current ADA Standards for directional signs.
-
1009.9 Signage
Signage indicating special accessibility provisions shall be provided as shown: 1....
-
11B-216.11 Check-out aisles
ETA Editor's Note The ADA requirements included at Section 11B-216.11 are provided for information only....
-
11B-216.11 Check-out aisles
ETA Editor's Note The ADA requirements included at Section 11B-216.11 are provided for information only....
-
Access Board: Directional Signage at Inaccessible Entrances
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
216 Signs
Signage shall also be installed at all inaccessible exits and where otherwise necessary to clearly indicate the direction to areas of rescue assistance....
