Access required by the ADA Standards must be put in place and ready for use as part of construction....
Search Results "ISO: International Organization for Standardization"
-
Can access be provided after construction based on need?
-
4.30.7(4)
assembly areas where permanently installed assistive listening systems are required by 4.1.3(19)(b) the availability of such systems shall be identified with signage that includes the international...
-
II-6.2000 Choice of design standard: UFAS or ADAAG.
[See subsections ...]
-
1. Adoption of the 2010 ADA Standards for Accessible Design
Adoption of the 2010 ADA Standards for Accessible Design....
-
§ 38.113(e) Signage
The International Symbol of Accessibility shall be displayed on the exterior of all doors complying with this section unless all cars and doors are accessible and are not marked by the access...
-
Most Fascinating Guy on the Planet
As amazing as he is, the most fascinating guy on the planet doesn't know what he needs to know about accessibility. Even he needs Corada to help him stay compliant.
-
You're Never Too Young ... to Learn About the ADA
Children playing with their toys notice that only one of their door thresholds is compliant. They remind us that we are never too young to learn about the ADA.
-
11B-411.2.1.2.1 Keypads
Keypads shall be in a 12-key ascending telephone keypad layout. Characters and symbols shall be centered on the corresponding button. The number five key shall have a single raised...
-
11B-411.2.1.2.1 Keypads
Keypads shall be in a 12-key ascending telephone keypad layout. Characters and symbols shall be centered on the corresponding button. The number five key shall have a single raised...
-
§ 37.9(c)(1)
(1) New construction or alterations of buildings or facilities on which construction has begun, or all approvals for final design have been received, before November 29, 2006, are...
-
11B-411.2.1.2.1 Keypads
Keypads shall be in a 12-key ascending telephone keypad layout. Characters and symbols shall be centered on the corresponding button. The number five key shall have a single raised...
-
11B-502.6.4.2
The parking space shall be outlined in blue or painted blue and shall be marked with an International Symbol of Accessibility complying with Section 11B-703.7.2.1 a minimum 36 inches wide...
-
2. Effective Date
On March 15, 2012, compliance with the 2010 Standards will be required for new construction and alterations and barrier removal....
-
Impact Recovery Systems Slow Stop Rebounding Bollard Video Presentation
A video of the SlowStop Rebounding Bollard Presentation.
-
Impact Recovery Systems Slow Stop Rebounding Bollard with Accessible Parking Sign
This video is a Demonstration of a Slow Stop Handicap Parking Bollard.
-
G. ANSI/AAMI HE 75
The Access Board has considered the recommended practices in Chapter 16 of ANSI/AAMI HE 75 in developing the technical criteria for the proposed standards....
-
Americans with Disabilities Act
2010, the Department of Justice issued regulations with revised accessibility standards for Titles II and III of the Americans with Disabilities Act (DOJ 2010 Standards)....
-
B6
[ADA Standards § 4.6.4] Yes No...
-
4.30.7(3)
Text telephones required by 4.1.3(17)(c) shall be identified by the international TDD symbol (Fig 43(c))....
-
If a state or local authority interprets an accessibility requirement differently than how a comparable requirement in the ADA Standards is interpreted under the ADA (or waives that requirement completely), does this have any bearing on ADA compliance?
may interpret or waive their own state or local accessibility codes as they see fit, those decisions have no effect on the obligation to comply with requirements of the applicable ADA Standards...
-
Signage
This sign must include the international symbol of access to assistive listening systems (specified in 4.30.7)....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
