Search Results "Firing Position"

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.3.2.1 Horizontal Position

  The height of the top of the gripping surface on horizontal standing supports shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum above the standing surface.

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.9.1 Standing Supports In Reference To Mammography Equipment

  To be useful, positioning supports must be shaped for grasping, positioned within reach range of all users, and be 12 inches long minimum when located on the moving C-arm or 18 inches long...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.1 Transfer Surface Height

  5.1 Transfer Surface Height

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.1.4 Transfer Surface Height Measurement

  5.1.4 Transfer Surface Height Measurement. The transfer surface height should be measured from the floor to the highest point on the seat in an uncompressed state, inclusive of...

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.2 Length

  The length of transfer supports shall comply with M305.2.2.1 or M305.2.2.2.

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.5.1 Armrest Provision for M302

  5.5.1 Armrest Provision for M302 Description: Diagnostic equipment used by patients in a seated position such as exam chairs typically have armrests....

• Federal Documents > Technical Assistance > Guidance on the 2010 ADA Standards for Accessible Design
  Visible Alarms in Guest Rooms with Communication Features

  is upgraded or replaced, or a new fire alarm system is installed....

• Federal Documents > Preamble to Guidelines > 36 CFR Parts 1190 and 1191 ADA and ABA Accessibility Guidelines - Preamble (Discussion of Comments and Changes)
  Scoping for Guest Rooms

  The Board has elected to reference the NFPA 72‒1999 National Fire Alarm Code and has included a requirement that appliances be permanently installed....

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment NPRM - Preamble
  Armrests (M302.3.2)

  M302.3.2 would require armrests to be provided on diagnostic equipment used by patients in a seated position....

• Federal Documents > Standards > 2010 ADA Standards
  Transient Lodging: ADA Standard Section 215.4

  Section 215.4 covers scoping requirements in the current ADA Standards for fire alarm systems in transient lodging.

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.8 Fittings

  Transfer supports shall not rotate within their fittings when in place for transfer.

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.7 Clearance

  Clearance between the transfer support gripping surface and adjacent surfaces or obstructions shall be 1 ½ inches (38 mm) minimum.

• Federal Documents > Preamble to Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
  M305.2.7 Clearance (Section-by-Section Analysis)

  In the MDE NPRM, the Access Board did not provide any specific requirements for clearances around the transfer support. However, in the preamble to the MDE NPRM the Access Board...

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment NPRM
  M305.2.3 Fittings

  Transfer supports shall not rotate within their fittings.

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.2.1.1 Transfer Surface Width Recommendations for M301

  Transfer Surface Width Recommendations for M301 The Committee recommends a transfer surface of 28 inches minimum width for equipment used by patients in a supine, side-lying, or prone position...

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M302.2.2 Sunset

  The low transfer position height, Item A of M302.2.1, shall cease to have effect on [Insert date 5 years after date of publication in the Federal Register]. [sic]...

• State and Local Documents > Referenced Standards > Excerpts from 2000 INTERNATIONAL BUILDING CODE®
  903.3.1.2 NFPA 13R sprinkler systems

  Where allowed in buildings of Group R, up to and including four stories in height, automatic sprinkler systems shall be installed throughout in accordance with NFPA 13R.

• State and Local Documents > Referenced Standards > Excerpts from 2000 INTERNATIONAL BUILDING CODE®
  903.3.1.1 NFPA 13 sprinkler systems

  Where the provisions of this code require that a building or portion thereof be equipped throughout with an automatic sprinkler system, sprinklers shall be installed throughout in...

• Federal Documents > Standards > 1991 ADA Standards for Accessible Design
  4.28.3(3)

  (3) The maximum pulse duration shall be two-tenths of one second (0.2 sec) with a maximum duty cycle of 40 percent. The pulse duration is defined as the time interval between initial...

• Federal Documents > Standards > 1991 ADA Standards for Accessible Design
  A4.28 Alarms

  [See subsections ...]

• Federal Documents > Technical Assistance > ADAAG Manual
  Location and Spacing

  Location and Spacing Rooms with an area than can be circumscribed by a circle 50 feet in radius can be covered by a single centrally located strobe of 75 cd. For very small rooms,...

• Federal Documents > Standards > 1991 ADA Standards for Accessible Design
  A4.28.2 Audible Alarms

  Audible emergency signals must have an intensity and frequency that can attract the attention of individuals who have partial hearing loss. People over 60 years of age generally have...

• Federal Documents > Standards > 1991 ADA Standards for Accessible Design
  4.28.3(5)

  (5) The flash rate shall be a minimum of 1 Hz and a maximum of 3 Hz.

• Federal Documents > Technical Assistance > ADAAG Manual
  Mounting Height

  Mounting Height ADAAG specifies a signal height 80 inches above the highest floor level within the space or 6 inches below the ceiling, whichever is lower. (This can be measured...