(6) The appliance shall be placed 80 in (2030 mm) above the highest floor level within the space or 6 in (152 mm) below the ceiling, whichever is lower.
Search Results "Firing Position"
-
4.28.3(6)
-
4.28.1 General
Alarm systems required to be accessible by 4.1 shall comply with 4.28. At a minimum, visual signal appliances shall be provided in buildings and facilities in each of the following...
-
4.28.1 GENERAL
Alarm systems required to be accessible by 4.1 shall comply with 4.28.
-
4.28.3* VISUAL ALARMS
If provided, electrically powered internally illuminated emergency exit signs shall flash as a visual emergency alarm in conjunction with audible emergency alarms. The flashing...
-
A4.28.3 VISUAL ALARMS
The specifications in this section do not preclude the use of zoned or coded alarm systems. In zoned systems, the emergency exit lights in an area will flash whenever an audible...
-
M301.2.2 Sunset
The low transfer position height, Item A of M301.2.1, shall cease to have effect on [Insert date 5 years after date of publication in the Federal Register]....
-
5.4.1 Transfer Support Location for M301 and M302
Provisions require transfer supports be provided for use with the transfer sides and be located within reach of the transfer surface and not obstruct transfer onto the surface when in position...
-
809.5.1.1 Alarm Appliances
Where alarm appliances are provided within a residential dwelling unit as part of the building fire alarm system, they shall comply with 702....
-
809.5.1.1 Alarm Appliances
Where alarm appliances are provided within a residential dwelling unit as part of the building fire alarm system, they shall comply with 702....
-
809.5.1.1 Alarm Appliances
Where alarm appliances are provided within a residential dwelling unit as part of the building fire alarm system, they shall comply with 702....
-
M302.2.1 Height
The transfer surface is permitted to be positioned outside of the specified height range when not needed to facilitate transfer....
-
M101.2 Application
Where diagnostic equipment is designed to support more than one patient position, the standards for each patient position supported shall be applied to the equipment....
-
5.4.10 Transfer Support Fittings Recommendations for M301 and M302
When the transfer supports latch into a locked position, the transfer supports must meet the required load conditions without movement....
-
M305.2.8 Fittings (Section-by-Section Analysis)
Another commenter (manufacturer) pointed out that bed rails, which are common on hospital beds, require a latched position and an unlatched position, which allows them to rotate in their...
-
M305.4 Leg Supports
Leg supports shall provide a method of supporting, positioning, and securing the patient’s legs....
-
Visible Alarms in Alterations to Existing Facilities
Section 215.1 of the 2010 Standards adds a new exception to the scoping requirement for visible alarms in existing facilities so that visible alarms must be installed only when an existing fire...
-
5.4.7 Transfer Support Gripping Surface Clearance Recommendation for M301 and M302
considering whether 1½ inches minimum clearance around the gripping surface would be appropriate for transfer supports on diagnostic equipment used by patients in a supine, prone, or side-lying position...
-
5.4.4 Transfer Support Distance from Transfer Surface Recommendations for M301 and M302
Surface Recommendations for M301 and M302 Description: This minimum distance ensures that the transfer support is within reach of the transfer surface and can be effectively used to position...
-
iv. Lifts
iv. Lifts Medical providers may need lifts to transfer some patients with mobility disabilities safely to examination or treatment tables or chairs or to gurneys or hospital beds....
-
5.2.1.1 Transfer Surface Width
The transfer surface should be 28 inches wide minimum for equipment used by patients in a supine, side-lying, or prone position....
-
11B-404.2.9 Door and gate opening force
Fire doors shall have a minimum opening force allowable by the appropriate Administrative Authority....
-
11B-404.2.9 Door and gate opening force
Fire doors shall have a minimum opening force allowable by the appropriate Administrative Authority....
-
OCCUPANT NOTIFICATION SYSTEMS
People who are blind or have low vision can hear standard building fire alarms and voice announcements over public address systems that warn of a danger or the need to evacuate or that provide...
-
F215.1 General
Where fire alarm systems provide audible alarm coverage, alarms shall comply with F215....