Doors, Doorways and Gates [§206.5 and §404] Compliance is required for doors, doorways, and gates providing user passage on accessible routes....
Search Results "Automatic Door"
-
Doors, Doorways and Gates [§206.5 and §404]
-
F220 Automatic Teller Machines and Fare Machines
[See subsections ...]
-
220 Automatic Teller Machines and Fare Machines
[See subsections ...]
-
R218 Doors, Doorways, and Gates
R218 Doors, Doorways, and Gates The SNPRM would revise R218 to read as follows: R218 Doors, Doorways, and Gates....
-
11B-408.3.2 Swinging doors
Swinging hoistway doors shall open and close automatically and shall comply with Sections 11B-404, 11B-407.3.2 and 11B-408.3.2....
-
11B-408.3.2 Swinging doors
Swinging hoistway doors shall open and close automatically and shall comply with Sections 11B-404, 11B-407.3.2 and 11B-408.3.2....
-
11B-408.3.2 Swinging doors
Swinging hoistway doors shall open and close automatically and shall comply with Sections 11B-404, 11B-407.3.2 and 11B-408.3.2....
-
404.2.7 Door and Gate Hardware
Handles, pulls, latches, locks, and other operable parts on doors and gates shall comply with 309.4....
-
1010.2.2 Hardware
Door handles, pulls, latches, locks and other operating devices on doors required to be accessible by Chapter 11A or 11B shall not require tight grasping, tight pinching or twisting of the...
-
1010.2.2 Hardware
Door handles, pulls, latches, locks and other operating devices on doors required to be accessible by Chapter 11A or 11B shall not require tight grasping, tight pinching or twisting of the...
-
11B-809.8.3 Door maneuvering clearance.
At the dwelling unit side of the primary entry doors, secondary exterior doors, and required exit doors maneuvering clearances shall be 44 inches (1118 mm) minimum in length measured...
-
404.2.6 Doors in Series and Gates in Series
The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1220 mm) minimum plus the width of doors or gates swinging into the space....
-
Opening Force
Section 404.2.9 addresses the opening force of doors and gates....
-
Door and Signal Timing for Hall Calls [4.10.7], Door Delay for Car Calls [4.10.8]
Timing, based on the distance between the farthest call button and the elevator door, begins with visible and audible signaling of car arrival....
-
Besam SL500 CGL Commercial Glass Entry Door Fixed Sidelite BP BIM
-
Toilet Room Doors
Sections 4.22.2 and 4.22.3 of the 1991 Standards and Section 603.2.3 of the 2010 Standards permit the doors of all toilet or bathing rooms with in-swinging doors to swing into the required...
-
Stanley SB600 Bifolding Door Bi-Fold Fold In Break Out
Requires the Premium User plan or above. (Login or upgrade your account!) -
BEA Inc. Mount Boxes Bollards
black Stainless steel mounting bracket UV Resistant ABS plastic cap allowing for wireless transmissions The Bollard is used for mounting pushplates that activate automatic...
-
1132A.3 Width and height of interior doors and secondary exterior doors
1132A.3 Width and height of interior doors and secondary exterior doors. Doors shall comply with the following:...
-
404.2.4.3 Recessed Doors and Gates
404.2.4.3 Recessed Doors and Gates....
-
11B-410.6 Doors and gates
Platform lifts shall have low-energy power-operated doors or gates complying with Section 11B-404.3. Doors shall remain open for 20 seconds minimum....
-
Stanley SB600 Bifolding Door Bi-Fold Fold In Break Out RH
Requires the Premium User plan or above. (Login or upgrade your account!) -
Stanley SB600 Bifolding Door Bi-Fold Fold In Break Out LH
Requires the Premium User plan or above. (Login or upgrade your account!) -
Stanley SB600 Bifolding Door Bi-Fold Fold Out Break Out
Requires the Premium User plan or above. (Login or upgrade your account!)
