black Stainless steel mounting bracket UV Resistant ABS plastic cap allowing for wireless transmissions The Bollard is used for mounting pushplates that activate automatic...
Doors, doorways, and gates providing user passage shall be provided in accordance with Section 11B-206.5. ...
Doors, doorways, and gates providing user passage shall be provided in accordance with Section 11B-206.5....
Doors, doorways, and gates providing user passage shall be provided in accordance with Section 11B-206.5....
404.2 Manual Doors, Doorways, and Manual Gates. Manual doors and doorways and manual gates intended for user passage shall comply with 404.2....
The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1219 mm) minimum plus the width of doors or gates swinging into the space....
The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1219 mm) minimum plus the width of doors or gates swinging into the space....
Shower and Sauna Doors in Transient Lodging Facilities....
There are entrances where mounting a wall switch and access controls directly to the wall adjacent to the door is impractical in terms of accessibility guidelines....
There are entrances where mounting a wall switch and access controls directly to the wall adjacent to the door is impractical in terms of accessibility guidelines....
PSE shall provide at least seventeen (17) ambulatory accessible and/or 60-inch wide accessible toilet compartments with an outward swinging, self-closing door disbursed as set forth in the...
Table 404.2.4.1 specifies maneuvering clearances for manual swinging doors and gates....
224.1.2 Guest Room Doors and Doorways....
707 Automatic Teller Machines and Fare Machines Advisory 707 Automatic Teller Machines and Fare Machines....
Advisory 224.1.2 Guest Room Doors and Doorways....
Advisory F224.1.2 Guest Room Doors and Doorways....
Several commenters requested that the final Guidelines incorporate minimum maneuvering clearances at doors, as provided by the ANSI Standard....