EXCEPTIONS: 1....
Search Results "Enhanced 9-1-1"
-
217.5 Shelves for Portable TTYs
-
409.3.1 Power Operation
car and hoistway doors and gates shall be power operated and shall comply with ANSI/BHMA A156.19 (1997 or 2002 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)...
-
11B-403.7 Continuous gradient
The slope of the resting area in all directions shall be 1:48 maximum. ETA Editor's Note 2013 CBC requirement 11B-403.7 is not present in 2010 ADAS. ...
-
1002.4.4 Clearances
EXCEPTIONS: 1. Where provided, securement devices shall be permitted to overlap required clearances. 2....
-
PUBLIC BUILDING OR FACILITY
[DSA-AC] A building or facility or portion of a building or facility designed, constructed, or altered by, on behalf of, or for the use of a public entity subject to Chapter 1, Section...
-
407.3.3 Numeric Keys (Section-by-Section Analysis)
The requirement for a tactilely discernible “5” key derives from existing 508 Standards § 1194.23(k)(1), but would be a new requirement for the 508 Standards and 255 Guidelines....
-
4.34.3(4) Bins
Where bins are provided, for envelopes, waste paper, or other purposes, at least one of each type provided shall comply with the applicable reach ranges in paragraph (1), (2), or (3) of...
-
4.6.5 PASSENGER LOADING ZONES
Vehicle standing spaces and access aisles shall be level with surface slopes not exceeding 1:50 in all directions....
-
M301.4.2 Clearance Around Base
The width of the base permitted within this clearance shall be 26 inches (660 mm) wide maximum at the edge of the examination surface and shall be permitted to increase at a rate of 1 inch...
-
1016.6 Openings
outdoor recreation access routes, passing spaces, and resting intervals such as spaces between the boards in a boardwalk and drainage grates to not allow passage of a sphere more than 1/...
-
903.4 Back Support
Back support shall be 2 1/2 inches (64 mm) maximum from the rear edge of the seat measured horizontally. ...
-
4.5.1 General
Exception 1. Fifty percent of the bins in multi-bin containers are exempt from section 4.5.1. Exception 2....
-
M302.4.2 Clearance Around Base
The width of the base permitted within this clearance shall be 26 inches (660 mm) wide maximum at the edge of the examination surface and shall be permitted to increase at a rate of 1 inch...
-
§ 35.150(b)(2)(i) Safe harbor
technical and scoping specifications for those elements in either the 1991 Standards or in the Uniform Federal Accessibility Standards (UFAS), Appendix A to 41 CFR part 101-19.6 (July 1,...
-
11B-217.5 Shelves for portable TTYs
Exceptions: 1....
-
1133A.3 Removable base cabinets
Sinks and work surfaces required by Section 1133A.4 (see Item 1 and Item 2) shall be provided with knee and toe space complying with Section 1133A.7....
-
PRIVATE BUILDING OR FACILITY
[DSA-AC] A place of public accommodation or a commercial building or facility subject to Chapter 1, Section 1.9.1.2. [2010 ADAS] Private Building or Facility. ...
-
II-3.4000 Separate benefit/integrated setting
The major principles of mainstreaming are -- 1) Individuals with disabilities must be integrated to the maximum extent appropriate. 2) Separate programs are permitted where necessary...
-
1009.8.1.1 Visible communication method
[DSA-AC and HCD 1-AC] A button complying with Section 1138A.4 or Sections 11B-205 and 11B-309 in the area of refuge shall activate both a light in the area of refuge indicating that rescue...
-
1133A.3 Removable base cabinets
Sinks and work surfaces required by Section 1133A.4 (see Item 1 and Item 2) shall be provided with knee and toe space complying with Section 1133A.7....
-
2.5 Visual Detection Distance
P)/50), P+1.96 (SQRT(P*(1-P)/50)]....
-
[2010 ADAS] 105.2.5 NFPA
NFPA National Fire Protection Association 1 Batterymarch Park Quincy, MA 02169-7471 Standard Reference Number Title Referenced in code section...
-
Section 1630.2(g) Disability
Accordingly, the definition of the term “disability” is divided into three prongs: An individual is considered to have a “disability” if that individual (1) has a physical or mental impairment...
-
RESNA Standards Committee on Inclusive Fitness
Vice Chair: Peter Axelson peter@beneficialdesigns.com Secretary: Jaime McGuire jaime@beneficialdesigns.com This new committee will develop guidelines and/or technical reports to: (1)...
