Review the updated information on the revisions to the ADA Standards regarding outdoor developed areas.
Search Results "ALI: Automatic Location Identification"
-
Outdoor Developed Areas: ADA Standard Section 9.
-
Transfer Devices for Use with Amusement Rides: ADA Standard Section 1002.6
Where possible, designers are encouraged to locate the transfer device seat no higher than 17 to 19 inches 430 to 485 mm) above the load and unload surface....
-
11B-233.3.1.2.6.1 Single building with one common (lobby) entrance
The following may only be used for determining required access to multifamily dwelling units, in a single building with one common (lobby) entrance, located on a site with difficult terrain...
-
11B-809.10.7.3 Reinforcement for grab bars
Where the water closet is located adjacent to lavatories, cabinets, wing walls, or privacy walls the grab bar reinforcement shall be 36 inches (914 mm) in length....
-
11B-1002.6 Transfer devices for use with amusement rides
Where possible, designers are encouraged to locate the transfer device seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
1010.2.13.1 Delayed egress locking system
A sign shall be provided on the door and shall be located above and within 12 inches (305 mm) of the door exit hardware: 6.3....
-
11B-232.1 General
providing the required mobility features in substitute cells (cells other than those where alterations are originally planned), provided that each substitute cell— i) Is located...
-
11B-232.1 General
providing the required mobility features in substitute cells (cells other than those where alterations are originally planned), provided that each substitute cell— i) Is located...
- Mind's Eye Audio Description for Television, Film and Video
- Pilot Rock APTX Full Sized Pedestal Rectangular Utility Table Using Lumber
- Pilot Rock APTX Full Sized Pedestal Rectangular Utility Tables Using Recycled Plastic
- Pilot Rock XT Series Side Accessible Picnic Table Using Aluminum
- Pilot Rock UT Series Side Accessible Picnic Table Using Aluminum
- Pilot Rock XT Series Side Accessible Picnic Table Using Recycled Plastic
-
9.b [§ 4.7.5]
Place the level in the same position and location as each of the arrows in the illustration to the left [below]....
-
F216.12 Amusement Rides
In addition, where accessible unload areas also serve as accessible load areas, signs indicating the location of the accessible load and unload areas shall be provided at entries to queues...
-
1.12 Future Construction Theaters
Those seating plans have been specifically approved by the United States as compliant with the wheelchair seating location requirements of both Standard 4.33.3 and §§ 221 and 802 of the...
-
11B-806.2.4 Toilet and bathing facilities
Toilet and bathing fixtures required to comply with Sections 11B-603 through 11B-610 shall be permitted to be located in more than one toilet or bathing area, provided that travel between...
-
11B-307.4 Vertical clearance
The leading edge of such guardrail or barrier shall be located 27 inches (686 mm) maximum above the finish floor or ground....
-
13 [§ 4.7.10]
13 [§ 4.7.10] A corner-type curb ramp is located at the center (or apex) of a corner and is often aligned to direct users into the middle of an intersection....
-
5.4.4.1 Transfer Support Distance from Transfer Surface Recommendation for Stretchers
5.4.4.1 Transfer Support Distance from Transfer Surface Recommendation for Stretchers The Committee recommends locating the transfer support along the long side of the of the transfer...
-
704.10 Vertical exposure
) vertically above the roof of an adjoining building or adjacent structure that is within a horizontal fire separation distance of 15 feet (4572 mm) of the wall in which the opening is located...