CODE COMPLIANCE ANSI/BHMA A156.2: A156.2-2011 Grade 1 certified ANSI/BHMA A156.25: Meets or exceeds all applicable requirements UL/ULC: UL 10C 3-hour rated BAA: Meets guidelines of the...
Search Results "Local Requirement"
- TownSteel XCE9010 Cylindrical Lockdown Rigid Trim Keypad Cylindrical
- TownSteel XCE9020 Cylindrial Lockdown Clutched Trim Cylindrical Keypad
- Ampetronic ILD100 Small Area, VOX Switching Audio Induction Loop Driver Hearing System
- Halsey Taylor Bi-Level Barrier-Free Cooler
- Stanley QED 100 Series Grade 1 Extra Heavy Duty Exit Devices
- TownSteel XCE9030 Cylindrical Lockdown Rigid Trim Security Cylinder Cylindrical Keypad
-
2.6 Communications.
Airports are required to take appropriate steps to ensure that their communications with individuals with disabilities are as effective as communications with other individuals, beneficiaries...
-
11B-410.8 Restriction sign
This section includes requirements which address platform size and gate configurations for lifts with 90-degree egress, and additionally requires signs posted at the landings as follows:...
-
Number of Accessible Bathrooms
Other commenters recommended that only one full bathroom be required to be made accessible....
-
Subpart D -- New Construction and Alterations (Section-By-Section Analysis and Response to Comments)
This requirement contemplates a high degree of convenient access....
-
11B-410.8 Restriction sign
This section includes requirements which address platform size and gate configurations for lifts with 90-degree egress, and additionally requires signs posted at the landings as follows:...
-
11B-1002.2 Accessible routes
. ◼ In load or unload areas and on amusement rides, handrails provided along walking surfaces complying with Section 11B-403 and required on ramps complying with Section 11B...
-
11B-604.8.2.2 Doors
Toilet compartment doors shall not swing into the minimum required compartment area. [2010 ADA Standards] 604.8.2.2 Doors....
-
11B-404.2.3 Clear width
There shall be no projections into the required clear opening width lower than 34 inches (864 mm) above the finish floor or ground....
-
11B-233.3.1.2.6.4 Test number three, unusual characteristics test
Unusual characteristics include sites located in a state or federally designated floodplain or coastal high-hazard areas and sites subject to other similar requirements of law or code that...
-
General: ADA Standard Section 224.1
Section 224.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for transient lodging guest rooms.
-
11B-604.8.2.2 Doors
Toilet compartment doors shall not swing into the minimum required compartment area. [2010 ADA Standards] 604.8.2.2 Doors....
-
11B-228.2 Mail boxes
residential facilities, where mail boxes are provided for each residential dwelling unit, mail boxes complying with Section 11B-309 shall be provided for each residential dwelling unit required...
-
11B-809.8.3 Door maneuvering clearance.
Maneuvering clearances shall extend the full width of the doorway and the required latch side or hinge side clearance....
-
11B-404.2.3 Clear width
There shall be no projections into the required clear opening width lower than 34 inches (864 mm) above the finish floor or ground....
-
11B-1002.2 Accessible routes
. ◼ In load or unload areas and on amusement rides, handrails provided along walking surfaces complying with Section 11B-403 and required on ramps complying with Section 11B...
-
Clear Width: ADA Standard Section 404.2.3
Section 404.2.3 covers the current ADA Standards for clear width at manual doors, doorways and manual gates that are part of an accessible route.
-
11B-404.2.11 Vision lights
Exception: Glazing panels with the lowest part more than 66 inches (1676 mm) from the finish floor or ground shall not be required to comply with Section 11B-404.2.11....
-
11B-228.2 Mail boxes
residential facilities, where mail boxes are provided for each residential dwelling unit, mail boxes complying with Section 11B-309 shall be provided for each residential dwelling unit required...