The user extends the cable to the required length (up to 18 feet) and plugs it into the vehicle....
Search Results "Local Requirement"
-
The Challenges EV Charging for People with Disabilities
-
11B-802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
Communication Features in Guest Rooms
Guest rooms required to have accessible communication features are required to have visual alarms....
-
802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
235 and 1003 Recreational Boating Facilities
235 and 1003 Recreational Boating Facilities These sections require that accessible boat slips and boarding piers be provided....
-
219 Assistive Listening Systems
This section covers requirements for assistive listening systems and receivers in assembly areas....
-
M305.2 Transfer Supports (Section-by-Section Analysis)
(Significant Changes – Transfer Supports), the Access Board strengthened the transfer support requirements and added additional requirements in the final rule to ensure that supports are...
-
BACKGROUND
BACKGROUND The Division of the State Architect – Access Compliance (DSA–AC) adopts Title 24 CBC code requirements relating to accessibility for persons with disabilities....
-
802.1.5 Overlap
The term "circulation paths" used in Section 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
503.1 General (Section-by-Section Analysis)
The proposed requirements in this section are separate from, and in addition to, any required conformance to WCAG 2.0 success criteria that may be otherwise required under the proposed 508...
-
4.7.1 General
All utilities required to be accessible shall be connected to an ORAR complying with section 2.0. Exception....
-
2.3.2
The acceptable tools should be selected based on the accuracy required and a reasonable balance between the accuracy of the tool and the time, cost, and experience required for measurement...
-
1133A.4.1, Item 4
Stone, cultured stone and tiled countertops may be used without meeting the repositioning requirements. 2....
-
11B-802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
§ 38.125(a)(2) Exception
If level-entry boarding, portable or platform lifts, ramps or bridge plates meeting the applicable requirements of this section are provided on station platforms or other stops required...
-
11B-612.2 Bench
Doors shall not swing into the clear floor space required by Section 11B-903.2....
-
§ 38.95(a)(2) Exception
If level-entry boarding, portable or platform lifts, ramps or bridge plates meeting the applicable requirements of this section are provided on station platforms or other stops required...
-
New and Altered Permanently Installed Amusement Rides
Section 234 of the 2010 Standards sets out scoping requirements and section 1002 sets out the technical requirements for the accessibility of permanently installed amusement rides....
-
Escalators
It also required color contrast on treads....
-
F203.2 Existing Elements
with these requirements unless altered....
-
11B-221.2.1.3 Other boxes
In boxes other than those required to comply with Section 11B-221.2.1.2, the total number of wheelchair spaces required shall be determined in accordance with Table 11B-221.2.1.1....
-
Two-Way Communication
The proposed rule included requirements for the cord length of provided handsets and instructions....
-
208.2 Minimum Number
Parking spaces complying with 502 shall be provided in accordance with Table 208.2 except as required by 208.2.1, 208.2.2, and 208.2.3....
-
206.2.4 Spaces and Elements
Accessible routes must connect all spaces and elements required to be accessible including, but not limited to, raised areas and speaker platforms....