Comments received from the public indicated that this approach was potentially confusing, as federal agencies, contractors, and vendors would have to make specific compliance determinations...
Search Results "ADA Compliance"
Filters
Commonly Searched Documents
-
7. Alternatives
-
Availability of Proposed Guidelines with Figures
In the past, the Architectural and Transportation Barriers Compliance Board (Access Board) submitted “camera ready” copy (i.e., images) of its guidelines to the Federal Register for the...
-
Alterations: Alternate Stalls
Alterations: Alternate Stalls An alternate stall may be substituted for the standard stall only in alterations where full compliance with requirements for a wheelchair accessible stall...
-
1017.3 Clear Tread Width
distance of the trail and may not be reduced by gates, barriers, or other obstacles unless an entity determines under Exception 1 to 1017.1 that a condition in 1019 does not permit full compliance...
-
Treatment of Data
A bivariate correlation was run to determine any significance between surface deficiencies or non-compliance with the accessibility standards and the measurable results for firmness and...
-
1016.1 General
When an entity determines that a condition in 1019 does not permit full compliance with a specific provision in 1016 on a portion of an outdoor recreation access route, Exceptions 1 and...
-
Suggested best practices for architects and other design professionals
It is simply a matter of clearly communicating four things: (1) what is wanted, (2) the standards used, (3) how compliance will be verified, and (4) what the result of noncompliance will...
-
104.11 Alternative materials, design and methods of construction and equipment
ETA Editor's Note Sections from the California Building Code Chapter 1 that are not adopted by the Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
-
11B-703.2 Raised characters
[2010 ADAS] Advisory 703.2 Raised Characters. Signs that are designed to be read by touch should not have sharp or abrasive edges....
-
2. Door Hardware
[ADA Stds. 9.2.2(3); 4.13.9] Yes __ No __ N/A __ Comments: _____________________________________...
-
Accessible routes
(DOT ADA Standard 206.3.)...
-
9. Faucet Control
[ADA Stds. 9.2.2(6)(e); 4.23.6; 4.19.5] Yes __ No __ N/A __ Comments: _____________________________________...
-
H7
[ADA Standards §§ 4.22.3; 4.2.3] Yes No Minimum spaces for turning...
-
H21
[ADA Standards § 4.16.4; 4.17.6] Yes No...
-
M13
[ADA Standards §§ 4.23.7; 4.27.2; 4.2.5 and Fig. 5; 4.2.6 and Fig. 6] Yes No...
-
H3
[ADA Standards § 4.13.9] Yes No If No, can the door be propped open without compromising privacy, or can the hardware be modified by adding new accessible hardware, or adapting...
-
General [§202.1]
General [§202.1] Additions and alterations undertaken at existing facilities are covered by the ADA Standards....
-
Are accessible spaces required in temporary parking lots and in unpaved lots, such as gravel or grass lots?
Yes, the ADA Standards apply to both permanent and temporary facilities, including parking facilities (§201.3)....
-
Maintenance of Accessible Features
The ADA Standards address the design, but not the maintenance, of building elements and features....
-
11B-503.3.3 Marking
[2010 ADAS] 503.3.3 Marking. Access aisles shall be marked so as to discourage parking in them....
-
§ 37.37(h)
Such systems are subject to the requirements of the regulations of the Department of Justice implementing title III of the ADA (28 CFR part 36) with respect to stations and other facilities...
-
§ 37.129(b)
(b) Complementary paratransit service for ADA paratransit eligible persons described in §37.123(e)(2) of this part may also be provided by on-call bus service or paratransit feeder service...
-
11B-703.5.7 Stroke thickness
[2010 ADAS] 703.5.7 Stroke Thickness. Stroke thickness of the uppercase letter "I" shall be 10 percent minimum and 30 percent maximum of the height of the character....