The top of the seat shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the bathroom finish floor....
Search Results "Floor Designation"
-
11B-610.3 Shower compartment seats
-
11B-805.7 Built-in cabinets and work surfaces
A 30-inch by 48-inch clear floor space, in compliance with Section 11B-305, shall be centered in front of the display screen....
-
11B-610.3 Shower compartment seats
The top of the seat shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the bathroom finish floor....
-
11B-805.7 Built-in cabinets and work surfaces
A 30-inch by 48-inch clear floor space, in compliance with Section 11B-305, shall be centered in front of the display screen....
-
SLEEPING ACCOMMODATIONS
Rooms intended and designed for sleeping....
-
§ 36.304(b)(18)
(18) Creating designated accessible parking spaces;...
-
Sec.36.304(b)(18)
(18) Creating designated accessible parking spaces;...
-
4.1.2(7)(a)
(a) Parking spaces designated as reserved for individuals with disabilities;...
-
Altered Rides
Rides Altered rides refer to changes in structural or operational characteristics of an existing ride vehicle configuration from those specified by the manufacturer or the original design...
- Step ‘n Wash Sink Step
-
Sloped Entries
The slope may be designed as zero grade beach or ramp access. With either design, the maximum slope permitted is 1:12 (8.33%)....
-
Is a transportation operator required to carry these “overweight” wheelchairs?
Some wheelchairs weigh more than 600 pounds when occupied, and the design load of the lifts on our vehicles is 800 pounds....
-
II. Research Methodology
Research Methodology The research design for this study of playground surfaces has been in development since 2005 with input from a national advisory committee. ...
-
FAQ: What does "powered by Evan Terry Associates" mean?
ETA is committed to the “Universal Design” concept for facility accessibility....
-
State or Local Code Certification
Certification facilitates compliance by ensuring that state and local code requirements are consistent with the ADA accessible design requirements....
-
1133A.2.1 Clear width
or the face of any appliance (excluding handles and controls) that projects into the kitchen and the opposing cabinet, countertop, appliance or wall as follows: U-shaped kitchens, designed...
-
106.5 Defined Terms
at 35.104 “Definitions” and the Title III Regulations at 36.104 “Definitions” include the following: 1991 Standards means requirements set forth in the ADA Standards for Accessible Design...
-
§ 1194.25(j)(3)
(3) Where any operable control is more than 10 inches and not more than 24 inches behind the reference plane, the height shall be 46 inches maximum and 15 inches minimum above the floor....
-
Mirrors
Provide a mirror in the Spy City Café men's and women's toilet rooms where the bottom edge of the reflecting surface of the mirror is mounted no more than 40" above the finished floor....
-
1b
Do they have a fixed or folding seat between 17"-19" above the floor, onto which a person who uses a wheelchair may transfer to shower?...
-
H27
Does this 36-inch wide stall have horizontal grab bars on both of the side partitions that are at least 36 inches long and 33 to 36 inches above the floor?...
-
§100.201 Covered multifamily dwellings
Covered multifamily dwellings means buildings consisting of 4 or more dwelling units if such buildings have one or more elevators; and ground floor dwelling units in other buildings consisting...
-
308.2.1 Unobstructed
Where a forward reach is unobstructed, the high forward reach shall be 48 inches (1220 mm) maximum and the low forward reach shall be 15 inches (380 mm) minimum above the finish floor or...
-
308.2.1 Unobstructed
Where a forward reach is unobstructed, the high forward reach shall be 48 inches (1220 mm) maximum and the low forward reach shall be 15 inches (380 mm) minimum above the finish floor or...