Accessible route requirements in ADAAG address width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level, doors, egress, and areas...
Search Results "Accessibility Requirement"
-
Accessible Routes
-
Required Compliance [§206.6]
Required Compliance [§206.6] Elevators are the typical means of providing an accessible route between stories and to mezzanines....
-
F216.8 Toilet Rooms and Bathing Rooms
Signs shall comply with 703.5 and shall include the International Symbol of Accessibility complying with 703.7.2.1....
-
216.8 Toilet Rooms and Bathing Rooms
Signs shall comply with 703.5 and shall include the International Symbol of Accessibility complying with 703.7.2.1....
-
216.8 Toilet Rooms and Bathing Rooms
Signs shall comply with 703.5 and shall include the International Symbol of Accessibility complying with 703.7.2.1....
-
2. Armrests Requirement
In the MDE NPRM, the Access Board required diagnostic equipment used by patients in the seated position to provide armrests (proposed M302.3.2)....
-
Co-sharing of Accessible Parking access Aisles by adjacent elevator door allowed?
Given: multistory parking structure circa 1980 with limited head height for vans Issue: Can an elevator door open to and co-share/use an access aisle for an accessible parking space?...
-
206 and Chapter 4 Accessible Routes
[See subsections ...]
-
§35.149 Discrimination prohibited.
§35.149 Discrimination prohibited. Except as otherwise provided in §35.150, no qualified individual with a disability shall, because a public entity's facilities are inaccessible...
-
4.22.4 Water Closets
If toilet stalls are provided, then at least one shall be a standard toilet stall complying with 4.17; where 6 or more stalls are provided, in addition to the stall complying with...
-
6.14.1 Clear Width
Gate openings and openings in barriers for pedestrian passage shall provide a clear width of 36 inches (915 mm), complying with ODAAG, section 1017.3 Clear Tread Width.
-
5.1.6 Clear Floor or Ground Space
A clear floor or ground space at least 36 inches (915 mm) by 48 inches (1220 mm) shall be provided parallel to the entrance to the camp shelter. One full unobstructed side of the...
-
§ 35.149 Discrimination prohibited.
Except as otherwise provided in § 35.150, no qualified individual with a disability shall, because a public entity's facilities are inaccessible to or unusable by individuals with...
-
§ 35.138 Ticketing.
[See subsections ...]
-
Guidelines for Requirement 7
The Fair Housing Act requires that an accessible or "usable" bathroom is one which provides sufficient space for an individual in a wheelchair to maneuver about....
-
Section B: Passenger Drop-Off Area
(§503.4) B2 Is the access aisle next to the vehicle pull-up space on a level surface, with a slope not exceeding 1:48 in all directions?...
-
Delta 1-1/2″ x 42″ ADA Grab Bar Concealed Mounting 40142-SS
Product Features and Benefits 42″ long, 1 1/2″ wide Concealed mounting - mounting hardware included 3″ diameter flanges 1 1/2″ wall clearance Limited Faucet and Finish...
-
Moen Home Care Peened 42" Grab Bar
Safety, comfort and peace of mind. It's engineered into every Moen Home Care® product we make. the securemount design allows for secure installation into any stud at any...
-
Bobrick 42" Straight Grab Bar B-6806 x 42
42" (1065mm) long, 1-1/2" (38mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
-
Bobrick 42" Straight Grab Bar B-5806 x 42
42" (1065mm) long, 1-1/4" (32mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
-
Bobrick 42" Straight Grab Bar Peened B-5806.99 x 42
42" (1065mm) long, 1-1/4" (32mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm)...
-
Bobrick 42" Straight Grab Bar Peened B-6806.99 x 42
42" (1065mm) long, 1-1/2" (38mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm)...
-
Irwin Seating Company ADA Movable Base
Movable base that allows for the removal of up to 3 chairs when a wheelchair space is needed. Movable bases are available for most chair platforms and are reverse anchored for quick...
-
Minimum Required Depth: ADA Standard Section 306.3.3
Section 306.3.3 covers the current ADA Standards for the minimum required depth for knee clearance.
