Yes No N/A Comments/Remedies B1 Is the vehicle pull-up space on a level surface, with slopes not exceeding 1:48 in all directions?...
Search Results "Sign Clear Floor Space"
-
Section B: Passenger Drop-Off Area
-
§ 382.21 Aircraft accessibility
(2) Aircraft with 100 or more passenger seats shall have a priority space in the cabin designated for stowage of at least one folding wheelchair; (3) Aircraft with more than one aisle...
-
Methods for Placing a Slope Tool on the Surface
There are several methods that can be used for measuring slopes and cross slopes with a digital slope meter. Each method has advantages and disadvantages.
-
Minimum Clear Corridor Width
A few commenters from the disability community advocated a minimum clear corridor width of 48 inches....
-
Seton Texas State ISA Parking Sign
Big signs increase your parking facility's compliance to state and federal guidelines on accessible parking 24"W x 24"H sign features widely-recognized ISA symbol Parking...
-
407.4.8.1.3 Floor Arrival
407.4.8.1.3 Floor Arrival. As the car passes a floor and when a car stops at a floor served by the elevator, the corresponding character shall illuminate....
-
Clear Width [4.8.3]
A maximum clear width is not specified....
-
Takeform Fusion Signage Floor Directional Type B
A slide-in printed insert enables the sign to be easily updated....
-
M102.1 Defined Terms (Section-by-Section Analysis)
decided to add six additional terms to this section; end transfer surface, examination chair, imagining [sic] equipment with bores, imagining [sic] bed, side transfer surface, and wheelchair space...
-
11B-216.5.2.1 Signs intended for use by pedestrians
Signs intended for use by pedestrians within parking facilities, including directional or informational signs indicating parking sections or levels, shall comply with the requirements of...
-
11B-216.5.2.1 Signs intended for use by pedestrians
Signs intended for use by pedestrians within parking facilities, including directional or informational signs indicating parking sections or levels, shall comply with the requirements of...
-
Signs Required at Waiting Lines to Amusement Rides
Signs Required at Waiting Lines to Amusement Rides....
-
11.1 Q. Under the individual building test, how is the second step of the test performed, which involves measuring the slope of the finished grade between the entrance and applicable arrival points?
A. The slope is measured at ground level from the entrance to the top of the pavement of all vehicular and pedestrian arrival points within 50 feet of the planned entrance, or, if...
-
M305.3.1 Length (Section-by-Section Analysis)
The MDE Advisory Committee supported the proposed technical provisions, but recommended adding additional criteria for standing supports on raised platforms with wheelchair spaces....
-
F217.4.2 Floor Requirement
Where at least one public pay telephone is provided on a floor of a building, at least one public TTY shall be provided on that floor....
-
ADA Sign Depot Meeting Room Sign with Tactile Text and Grade 2 Braille - 8" x 4"
Meeting Room Sign - 8" x 4" - ADA Compliant Tactile Braille Sign ADA compliant non-glare matte finish ADA compliant font and tactile (1/32 inch raised) letters ADA...
-
Maps/floor plans
Maps/floor plans: b. Provide at the front desk tactile maps of the Museum and floor plan that visitors can borrow. See 28 C.F.R. § 36.303....
-
Seton Accesible Route Signs - Entrance with ISA
Each sign is carefully engraved with the ISA symbol Setonply® is a tough, stain-resistant multi-layered acrylic and cleans easily with a damp cloth 12"W x 4"H signs are available...
-
11B-707.7.1 Visibility
The display screen shall be visible from a point located 40 inches (1016 mm) above the center of the clear floor space in front of the machine....
-
11B-707.7.1 Visibility
The display screen shall be visible from a point located 40 inches (1016 mm) above the center of the clear floor space in front of the machine....
-
Visibility: ADA Standard Section 707.7.1
The display screen shall be visible from a point located 40 inches (1015 mm) above the center of the clear floor space in front of the machine....
-
11B-411.4.7.4 Button spacing
Button spacing shall comply with Section 11B-407.4.7.1.5....
-
11B-411.4.7.4 Button spacing
Button spacing shall comply with Section 11B-407.4.7.1.5....
-
Minimum Required Depth: ADA Standard Section 306.3.3
Section 306.3.3 covers the current ADA Standards for the minimum required depth for knee clearance.
