As Department research indicates, individual devices have an average lifespan of four to seven years....
Search Results "Floor Destination Indicator"
Commonly Searched Documents
-
3.6.2. Device Replacement
-
Signal Clearance Intervals
Manual wheelchair users had the longest 85th percentile clearance intervals (greater than those provided by the AASHTO assumptions), indicating that they would need the most time to clear...
- Unity Surfacing Systems Tough-Land Surfacing
- Willoughby Industries WAF-3603 AquaFount® Three Station Half Round 36" Solid Surface Deep Bowl Washfountain
- Caroma® USA Sydney Smart 305 Easy Height Elongated 1 Piece Toilet
-
ADDENDUM TO PHASE I FINAL REPORT: Points of Clarification
One subject could not transfer higher or lower than their device's seat to floor height. ...
- AJW Architectural Products U126 40 oz. Vertical Liquid Soap Dispenser - Surface Mounted
- BEA Inc. Indoor & Outdoor Door Entry Keypads
- Delta H2Optics Exposed Flush Valve 81T201BTA
- Rockwood Manufacturing Company K1038 .038" Thick - Metal Kick Plate
- GE Profile™ Series 30" Slide-In Double Oven Electric Convection Range PS950EFES
-
Spaces and Elements: ADA Standard Section 206.2.4
Section 206.2.4 covers the scoping requirements in the most current ADA Standards for accessible routes connecting spaces and elements within a building.
- Panda IS.14 Aluminum Wood Clad IMPACT Lift & Slide System
-
Height Requirements
revised to specifically cover operable parts that are "intended for use only by service or maintenance personnel," "electrical or communication receptacles serving a dedicated use," and "floor...
-
1132A.5.1 General
The floor or landing on the dwelling unit side of the primary entry door and any required exit door shall have a minimum length of not less than 44 inches (1118 mm)....
-
18. Where an existing ground level play component is replaced, should the new component comply with the technical provisions of Section 1008.4 even if there is not an accessible route to it?
In this case, the spring rocker being replaced would need to have the rocker seat height between 11 and 24 inches and clear floor or ground space and maneuvering space provided adjacent...
-
1007.1 Accessible means of egress required
In assembly spaces with sloped floors, one accessible means of egress is required from a space where the common path of travel of the accessible route for access to the wheelchair spaces...
-
16. If a play surface is replaced with an accessible surface and the existing ground level play components are not accessible, do the components need to be replaced?
If the alteration to the play area only involves the surfacing, only the surface along accessible routes, clear floor or ground spaces, and maneuvering spaces must comply with the ASTM F...
-
4.3.11.2 Size
EXCEPTION: The appropriate local authority may reduce the minimum number of 30-inch by 48-inch (760 mm by 1220 mm) areas to one for each area of rescue assistance on floors where the occupant...
-
General [9.1.1]
Objects with leading edges above 27 inches and below 80 inches above the floor cannot project more than 4 inches unless there is a tactile cane detectable cue below the object....
-
4.17.3 SIZE AND ARRANGEMENT
If the depth of toilet stalls is increased at least 3 in (75 mm), then a floor-mounted water closet may be used....
-
Historic Preservation [4.1.7]
These requirements address accessible routes, ramps, entrances, toilet rooms, access between floors, and displays....
-
A4.5.3 CARPET
When both carpet and padding are used, it is desirable to have minimum movement (preferably none) between the floor and the pad and the pad and the carpet, which would allow the carpet to...
-
§ 37.43(d)
An accessible path of travel may include walks and sidewalks, curb ramps and other interior or exterior pedestrian ramps, clear floor paths through corridors, waiting areas, concourses,...