11B-802 Wheelchair spaces, companion seats, and designated aisle seats and semi-ambulant seats [2010 ADA Standards] 802 Wheelchair Spaces, Companion Seats, and Designated Aisle Seats ...
Search Results "FTDS: Federal Trail Data Standards"
Commonly Searched Documents
-
11B-802 Wheelchair spaces, companion seats, and designated aisle seats and semi-ambulant seats
-
Guidelines for Requirement 2
The Department has retained the applicable provisions of the ANSI Standard for parking space....
- SLOPE Waste Receptacles
- Proline Drain: QuickDrainUSA - Tub to Shower Conversion
-
T704 Announcement Systems
No commenters suggested or cited any referenceable standards for audio quality....
-
Safe Harbors
Elements that do not comply with the requirements for those elements in the 1991 Standards must be modified to the extent readily achievable....
-
Common Use Circulation Paths in Employee Work Areas
The 1991 Standards at section 4.1.1(3), and the 2010 Standards at section 203.9, require employee work areas in new construction and alterations only to be designed and constructed so that...
-
"Existing Facility" (Section-by-Section Analysis)
A newly constructed facility remains subject to the accessibility standards in effect at the time of design and construction, with respect to those elements for which, at that time, there...
-
ASME
for Platform Lifts and Stairway Chairlifts 1109.8, Table 3001.3 [2010 ADA Standards] 105.2.2 ASME....
-
Accessible Route
The exceptions contained in section 1003.2 of the 2010 Standards modify the requirements of Chapter 4....
-
Title III Readily Achievable Barrier Removal
an existing pool, removing barriers may involve installation of a fixed pool lift with independent operation by the user or other accessible means of entry that complies with the 2010 Standards...
-
Accessible Teeing Grounds, Putting Greens, and Weather Shelters
Sections 238.2 and 1006.4 of the 2010 Standards require that golf cars be able to enter and exit each putting green and weather shelter....
-
Accessible Route to Play Components
Section 206.2.17 of the 2010 Standards provides scoping requirements for accessible routes to ground level and elevated play components and to soft contained play structures....
-
Minimum Clear Opening
Representatives Edwards, Frank, and Fish expressed their support for the Option One specification on minimum clearance which is consistent with the ANSI Standard....
-
Water Closet Clearances
The Department gave careful consideration to the costs and benefits of its adoption of the standards relating to water closet clearances in single-user toilet rooms....
-
Water Closet Clearances
The Department gave careful consideration to the costs and benefits of its adoption of the standards relating to water closet clearances in single-user toilet rooms....
-
National Network of ADA Centers
confusion for not coming to a low height number was the fact that a high number was never clearly factored into the discussions, nor was the distance of movement of 8” The proposed standards...
-
1 - Design and drawing
1 - Design and drawing Current practice It is typical practice for architects to use the values published in guidelines and standards and repeat the values on the drawings....
-
Section 36.204 Administrative Methods (Preamble, Section-by-Section Analysis)
Section 36.204 Administrative Methods Section 36.204 specifies that an individual or entity shall not, directly, or through contractual or other arrangements, utilize standards or criteria...
-
Section 36.311 Mobility Devices (Section-by-Section Analysis)
If a facility complies with the applicable design requirements in the 1991 Standards or the 2010 Standards, the public accommodation will not be required to exceed those standards to accommodate...
-
Van Accessible Parking Spaces
The 1991 Standards, at sections 4.1.2 (5)(b), 4.6.3, 4.6.4, and 4.6.5, require one in every eight accessible parking spaces to be van accessible....
-
Section 35.151(d) Scope of coverage
Although the Department may use the requirements of the 2010 Standards as a guide to determining when and how to make equipment and furnishings accessible, those determinations fall within...
-
M101.6 Dimensional Tolerances (Section-by-Section Analysis)
manufacturers and one medical association) indicated that tolerances vary based on the manufacturer, product design, and manufacturing process and that they are unaware of any industry standard...
-
9. I already purchased a portable lift before March 15, 2012. Can I still use it?
If you have purchased a non-fixed lift before March 15th that otherwise complies with the requirements in the 2010 Standards for pool lifts (such as seat size, etc.), you may use it, as...