Question 37 asked whether a folding or removable seat should be required on weight scales for use in the standing position. NPRM, 77 FR at 6930....
Search Results "Vertical Standing Support"
-
5. Exception from the Requirements of M302 for Weight Scales with Integral Seats
-
Figure M3: Overview of M302 Diagnostic Equipment for Use by a Patient in a Seated Position
[See subsections ...]
-
5.4.2.1 Transfer Support Length Recommendation for Stretchers
For Stretchers, the Committee recommends transfer supports be 15 inches minimum length....
-
M301.3.1 Transfer Supports
Note 1: As with other patient positioning aids, a positioning support’s load bearing design may be different than that of a transfer support....
-
TownSteel ED1300 Grade 1 Concealed Vertical Rod Panic Device
The ED1000 Series Exit Devices and Trims are designed for new or retrofit installation of Von Duprin 98/99 Series. ED1300 is ANSI Certified Grade 1 and UL listed for Panic Hardware....
-
1008.2 Accessible Routes
Where accessible routes serve ground level play components, the vertical clearance shall be 80 inches high (2030 mm) minimum....
-
1008.2 Accessible Routes
Where accessible routes serve ground level play components, the vertical clearance shall be 80 inches high (2030 mm) minimum....
-
Resting Intervals [1017.8]
The vertical alignment of the trail tread, turning space, and resting interval must be nominally planar so that all the wheels of a mobility device touch the ground when turning into and...
-
1008.2 Accessible Routes
Where accessible routes serve ground level play components, the vertical clearance shall be 80 inches high (2030 mm) minimum....
-
11B-1008.2 Accessible routes
Where accessible routes serve ground level play components, the vertical clearance shall be 80 inches (2032 mm) high minimum....
-
11B-1008.2 Accessible routes
Where accessible routes serve ground level play components, the vertical clearance shall be 80 inches (2032 mm) high minimum....
-
11B-1008.2 Accessible routes
Where accessible routes serve ground level play components, the vertical clearance shall be 80 inches (2032 mm) high minimum....
-
§ 38.93(d)(1) Requirements
Vertical alignment may be accomplished by car air suspension, platform lifts or other devices, or any combination....
-
Magnuson Group RIGA Series Waste Receptacle
Designed by JM Massana and JM Tremoleda, RIGA is a family of waste receptacles offering various size capacities and that includes a combination ash/trash unit as well as a matching umbrella stand...
-
Kompan, Inc. Elements Play Structures Ridge ELE500003
The Ridge supports traditional playground games such as “Do-not-touch the ground” as all activities are interconnected....
-
1017.5 Tread Obstacles
Tread obstacles on trails, passing spaces, and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
1017.5 Tread Obstacles
Tread obstacles on trails, passing spaces, and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
1016.5 Obstacles
Obstacles on outdoor recreation access routes, passing spaces, and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
1016.5 Obstacles
Obstacles on outdoor recreation access routes, passing spaces, and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
Service Animals and Emotional Support Animals
Individuals with disabilities may use service animals and emotional support animals for a variety of reasons....
-
5.4.4.1 Transfer Support Distance from Transfer Surface for Stretchers
5.4.4.1 Transfer Support Distance from Transfer Surface for Stretchers....
-
T502.2.2 Other Vehicles
For other non-rail vehicles, the vertical clearance at doorways shall be 56 inches (1420 mm) minimum on small non-rail vehicles and 68 inches (1725 mm) on large non-rail vehicles....
-
4.11.1 Location
Platform lifts (wheelchair lifts) permitted by 4.1 shall comply with the requirements of 4.11.
-
4.11.1 LOCATION
Platform lifts permitted by 4.1 shall comply with the requirements of 4.11.
