(2) If, as a result of compliance with the alterations requirements specified in paragraph (d)(1) of this section, the measures required to remove a barrier would not be readily achievable...
Search Results "Smoke Barrier"
Filters
Commonly Searched Documents
-
Sec.36.304(d)(2)
-
§ 37.5(f)
compliance with the requirements of the rules of the Department of Justice concerning eligibility criteria, making reasonable modifications, providing auxiliary aids and services, and removing barriers...
-
F101 Purpose
construction, addition to, alteration, and lease of sites, facilities, buildings, and elements to the extent required by regulations issued by Federal agencies under the Architectural Barriers...
-
1. Adoption of the 2010 ADA Standards for Accessible Design
To minimize compliance burdens on entities subject to more than one legal standard, these design standards have been harmonized with the Federal standards implementing the Architectural Barriers...
-
§ 37.5(i)(1) Private entity-private transport
compliance with the requirements of the rules of the Department of Justice concerning eligibility criteria, making reasonable modifications, providing auxiliary aids and services, and removing barriers...
-
20. Existing facilities
We have received some comments from organizations of handicapped persons on the subject of requiring, over an extended period of time, a barrier-free environment—that is, requiring the removal...
-
Typical Day - Public Entities: (State and Local Governmental Entities)
Communication Barriers to people with Visual Impairments (30 - 60 minutes) Communication is a critical responsibility mandated by Title II....
-
Sioux Chief DropKick™ Offset Flange 889-45PAM
Full-flow, 3" I.D. throat – no restriction Solvent welds inside 3" Sch. 40 fitting hub Corrosion-resistant 430 stainless steel swivel ring is engineered for maximum...
-
Oatey Level Fit Offset Closet Flange Metal Ring 43501 - PVC
The metal ring provides added strength and cracking resistance to the flange and can be rotated to allow precise alignment of bolts and screws. Solvent welds inside of 4" or...
-
Oatey Level Fit Offset Closet Flange Metal Ring 43804 - PVC Bulk
The metal ring provides added strength and cracking resistance to the flange and can be rotated to allow precise alignment of bolts and screws. Solvent welds inside of 4" or...
-
Oatey Level Fit Offset Closet Flange Metal Ring 43500 - ABS 15150
The metal ring provides added strength and cracking resistance to the flange and can be rotated to allow precise alignment of bolts and screws. Solvent welds inside of 4" or...
-
Sioux Chief FullFlush™ Offset Flange 889-AOM
Full-flow, 3" I.D. throat – no restriction Allows for 1?½" offset in any direction for closet bowl setting Corrosion-resistant 430 stainless steel swivel ring is engineered...
-
Zurn Z1209 Vertical Offset Siphon Jet Water Closet Support System
FEATURES: Vertical, offset water closet carrier 300 lb. load capacity
-
4.3 Locker Room Barriers and Solutions
Barriers Solutions Easy/Low cost Involved / High cost Not enough space in front of the lockers Ask staff to permanently assign you a...
-
6.14.1 Clear Width
Gate openings and openings in barriers for pedestrian passage shall provide a clear width of 36 inches (915 mm), complying with ODAAG, section 1017.3 Clear Tread Width....
-
Element-by-element safe harbor for public accommodations. (Section-by-Section Analysis)
point for assessing an entity's barrier removal obligations....
-
Technical difficulty and readily achievable
Along with cost and business operation, the technical feasibility of barrier removal must be taken into consideration....
-
4. I understand that a waiver from accessibility requirements may be obtained?
For facilities that were built prior to January 26, 1992, the federal requirement is to remove barriers to the extent that it is "readily achievable" and evaluations to determine if removing...
-
Sec.36.308(a)(2)
(2) If removal of seats is not readily achievable, a public accommodation shall provide, to the extent that it is readily achievable to do so, a portable chair or other means to...
-
Sec. 469.107. Review of Plans and Specifications for Structures Not Subject to Chapter.
The commission may:
