The clearance between the car platform sill and the edge of any hoistway landing shall be 1¼ inch (32 mm) maximum....
Search Results "Raised Platform"
Commonly Searched Documents
- 
    
  
  11B-407.4.3 Platform to hoistway clearance
  
- 
    
  
  410.1 General
  Platform lifts shall comply with ASME A18.1 (1999 edition or 2003 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1).... 
- 
    
  
  410.1 General
  Platform lifts shall comply with ASME A18.1 (1999 edition or 2003 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1).... 
- 
    
  
  1008.3.1 Transfer Platforms
  1008.3.1 Transfer Platforms. Transfer platforms shall be provided where transfer is intended from wheelchairs or other mobility aids. Transfer platforms shall comply with 1008.3.1.... 
- 
    
  
  1008.3.1 Transfer Platforms
  Transfer platforms shall be provided where transfer is intended from wheelchairs or other mobility aids. Transfer platforms shall comply with 1008.3.1.... 
- 
    
  
  206.7.4 Judicial Spaces
  Platform lifts shall be permitted to provide an accessible route to: jury boxes and witness stands; raised courtroom stations including, judges' benches, clerks' stations, bailiffs' stations... 
- Sesame Retractable Stairs with Lift
- 
    
  
  206.7 Platform Lifts
  Platform lifts shall comply with 410. Platform lifts shall be permitted as a component of an accessible route in new construction in accordance with 206.7.... 
- 
    
  
  F237 Fishing Piers and Platforms
  [See subsections ...] 
- 
    
  
  1005 Fishing Piers and Platforms
  [See subsections ...] 
- 
    
  
  1005 Fishing Piers and Platforms
  [See subsections ...] 
- 
    
  
  237 Fishing Piers and Platforms
  [See subsections ...] 
- 
    
  
  ASME A18.1 Safety Standard [§410.1]
  ASME A18.1 Safety Standard [§410.1] Platform lifts must meet the ASME A18.1 Safety Standard for Platform Lifts and Stairway Chairlifts.... 
- 
    
  
  F206.7 Platform Lifts
  Platform lifts shall comply with 410. Platform lifts shall be permitted as a component of an accessible route in new construction in accordance with F206.7.... 
- 
    
  
  502.3 Accessibility Services
  Platforms and software tools provided by the platform developer shall provide a documented set of accessibility services that support applications running on the platform to interoperate... 
- 
    
  
  Can platform lifts be locked?
  Situations in which platform lifts are locked and require users to request or retrieve a key for operation will not satisfy this requirement for independent operation.... 
- 
    
  
  502.3 Accessibility Services
  Platform software and software tools that are provided by the platform developer shall provide a documented set of accessibility services that support applications running on the platform... 
- 
    
  
  M303.3.3 Ramped
  Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3. 
- 
    
  
  M303.3.3 Ramped (Section-by-Section Analysis)
  The MDE NPRM proposed that for equipment with a change in level at the entry of a wheelchair space, level changes greater than ½ inch high would be required to be ramped and comply... 
- 
    
  
  M303.3.3 Ramped
  Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3. 
- 
    
  
  M303.3.3.4 Edge Protection
  Ramps with drop offs ½ inch (13 mm) or greater shall provide edge protection 2 inches (50 mm) high minimum on each side. 
- 
    
  
  1008.3.1 Transfer Platforms
  Transfer platforms shall be provided where transfer is intended from wheelchairs or other mobility aids. Transfer platforms shall comply with 1008.3.1.... 
- 
    
  
  Car Designations: ADA Standard Section 407.2.3.2
  Section 407.2.3.2 covers the current ADA Standards for elevator car designations. 
- 
    
  
  11B-407.2.3.2 Reserved
  ETA Editor's Note Imposing additional requirements regarding characters and colors, the preceding CBC requirements pertaining to elevator hoistway signs are more stringent... 
