6830 Series Template - Low Profile, Reverse Latch, Cylindrical Push Pull Reverse Latch Cylindrical push/pull reverse latch 1-3/4" standard door thickness (specify if...
Search Results "Medical Exam"
Filters
Commonly Searched Documents
-
Architectural Builders Hardware Mfg., Inc. 6830 Series Time Out/Reverse Low Profile Hospital Latch
-
Architectural Builders Hardware Mfg., Inc. 6000 Series Wide Paddle Cylindrical Hospital Latch
LR6000 Hospital Latch Wide Paddle Cylindrical Hospital Latch 1-3/4" standard door thickness (specify if different) Meets ADA requirements
-
Architectural Builders Hardware Mfg., Inc. 6000 Series Push/Pull Hospital Latch
The 6000 Series Push/Pull Hospital Latch offers versatility and durability for commercial and institutional settings. These models are designed for commercial and institutional doors...
-
Rockwood Manufacturing Company 596S Hospital Push Pull Latch 2-3/4" Backset
Material: Stainless Steel FEATURES: • Easy to operate low-force paddle. • Non-handed (except for engraved models). • Includes Standard 161 and ASA strike. • 2-3/4", 5" or 7"...
-
Corbin Russwin Inc. HPSK Push Pull Paddle Trim
Corbin Russwin HPSK (mortise lock) push/pull paddle trim provides an aesthetically pleasing alternative to products with standard push/pull trim. Its heavy-duty design and ANSI/BHMA...
-
Rockwood Manufacturing Company 596 Hospital Push Pull Latch 5" Backset
Material: Stainless Steel FEATURES: • Easy to operate low-force paddle. • Non-handed (except for engraved models). • Includes Standard 161 and ASA strike. • 2-3/4", 5" or 7"...
-
Don-Jo Mfg., Inc. 2-3/4" Hospital Latch 4500
Product Specifications Number 4500 Back set 2-3/4" Material Brass Size 2-3/4" x 4-1/2" Shelf...
-
Don-Jo Mfg., Inc. 5" Hospital Latch 4550
Product Specifications Number 4550 Back set 5" Material Brass Size 2-3/4" x 4-1/2" Shelf...
-
9.1 Overview of Legal Obligations
After making a conditional job offer, an employer may ask about a person's workers' compensation history in a medical inquiry or examination that is required of all applicants in the same...
-
M301.4.1 Clearance in Base
The base of diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep...
-
M301.4.1 Clearance in Base
The base of the equipment shall provide a clearance 44 inches (1120 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum...
-
M307 Operable Parts (Section-by-Section Analysis)
Five commenters responded, one commenter (state agency concerned with accessibility) recommended adopting the reach ranges and four commenters (one medical association, one academic, and...
-
M305.2.2.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M305.2.2.1 shall be 15 inches (380 mm) long minimum. Transfer supports shall be positioned along 13 ½ inches...
-
M305.2.4.1 Circular Cross Section
Transfer supports with circular cross sections shall have an outside diameter of 1 ¼ inches (32 mm) minimum and 2 inches (51 mm) maximum.
-
M305.2.1.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be capable of supporting transfer on each side of the transfer surface.
-
M305.2.1.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side.
-
M305.2.2.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be 28 inches (710 mm) long minimum and shall be positioned along the width of transfer...
-
5.3.1 Permitted Obstructions to Transfer Sides for Equipment Used by Patients in a Supine, Prone, Side-Lying or Seated Position
5.3.1 Permitted Obstructions to Transfer Sides for Equipment Used by Patients in a Supine, Prone, Side-Lying or Seated Position. A 3-inch maximum obstruction is permitted at transfer...
-
5.4.3 Transfer Support Height for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
5.4.3 Transfer Support Height for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position. Transfer supports should be positioned 6 inches minimum and 19 inches maximum...
-
5.4.3 Transfer Support Height for M301 and M302
5.4.3 Transfer Support Height for M301 and M302 Description: Transfer support height applies to the vertical distance that the gripping area of the support is above the transfer...
-
11B-223 Medical care and long-term care facilities
SECTIONS 11B-223 Medical care and long-term care facilities 11B-223.1 General....
-
M305.4 Leg Supports (Section-by-Section Analysis)
Four commenters (medical association, accessibility consultant, disability rights organization, and a state agency) agreed with requiring leg supports when stirrups are provided....
-
Entry Doors
Entry Doors Under the ADA Standards for Accessible Design, an accessible doorway must have a minimum clear opening width of 32 inches when the door is opened to 90...
-
a. Transfer Surface Adjustability
The MDE NPRM proposed that the same transfer surface height range of 17 inches minimum to 19 inches maximum be applied to both diagnostic equipment used in the supine, prone, or...
