Shower Stalls [4.21] In accessible bathing facilities, at least one tub or one shower must be accessible. ADAAG provides specifications for several types of shower stall designs:...
Search Results "Element"
2010 ADA Definition
Element: An architectural or mechanical component of a building, facility, space, or site.
Filters
Commonly Searched Documents
-
Shower Stalls [4.21]
-
4.24.6 Exposed Pipes and Surfaces
Hot water and drain pipes exposed under sinks shall be insulated or otherwise configured so as to protect against contact. There shall be no sharp or abrasive surfaces under sinks.
-
3.3.3 Identification of Accessible Picnic Units
Where not all picnic units are accessible, the picnic units that are accessible shall not be identified by signs at the individual units. Information on the location of accessible...
-
4.24.6 EXPOSED PIPES AND SURFACES
Hot water and drain pipes exposed under sinks shall be insulated or otherwise covered. There shall be no sharp or abrasive surfaces under sinks.
-
F212.3 Sinks
* * * * * EXCEPTIONS: * * * * * 2. In camping facilities and picnic facilities, sinks shall not be required to comply with F212.3 where a cooktop or conventional range is not...
-
11B-608.3.2 Standard roll-in type shower compartments
11B-608.3.2 Standard roll-in type shower compartments. Grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the...
-
Guestrooms with Roll-in Showers
Guestrooms with Roll-in Showers Common Problem: In hotels, motels, or other lodging facilities of 50 or more sleeping rooms, no rooms with roll-in showers are provided, or the...
-
11B-606.7 Sink depth
11B-606.7 Sink depth. Where a forward approach is required at a sink, knee and toe clearance shall be provided in compliance with Section 11B-306.
-
11B-606.1 General
11B-606.1 General. Lavatories and sinks shall comply with Section 11B-606. [2010 ADAS] Advisory 606.1 General. If soap and towel dispensers are provided, they must be located...
-
11B-809.4.1 Subsequent bathrooms
In residential dwelling units with more than one bathroom, when a bathtub is installed in the first bathroom in compliance with Section 11B-809.4 and a shower compartment is provided...
-
11B-606.7 Sink depth
Where a forward approach is required at a sink, knee and toe clearance shall be provided in compliance with Section 11B-306.
-
11B-606.1 General
Lavatories and sinks shall comply with Section 11B-606. Advisory 11B-606.1 General. If soap and towel dispensers are provided, they must be located within the reach ranges...
-
11B-608.3.2 Standard roll-in type shower compartments
Grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat. Grab bars shall be installed 6 inches (152 mm)...
-
11B-809.4.1 Subsequent bathrooms
In residential dwelling units with more than one bathroom, when a bathtub is installed in the first bathroom in compliance with Section 11B-809.4 and a shower compartment is provided...
-
Guest Rooms with Mobility Features: ADA Standard Section 224.2
Section 224.2 covers scoping requirements in the current ADA Standards for transient lodging guest rooms with mobility features.
-
§ 35.151(d) Scope of coverage
The proposed standards apply to fixed or built-in elements of buildings, structures, site improvements, and pedestrian routes or vehicular ways located on a site....
-
§ 35.151(d) Scope of coverage.
The 1991 Standards and the 2010 Standards apply to fixed or built-in elements of buildings, structures, site improvements, and pedestrian routes or vehicular ways located on a site....
-
11B-212.3 Sinks
Where sinks are provided, at least 5 percent, but no fewer than one, of each type provided in each accessible room or space shall comply with Section...
-
F213.3.1 Toilet Compartments
Where toilet compartments are provided, at least one toilet compartment shall comply with 604.8.1. In addition to the compartment required to comply with 604.8.1, at least one...
-
607.2 Clearance
Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches (760 mm) wide minimum. A lavatory complying with 606 shall be permitted at the control...
-
608.3.3 Alternate Roll-In Type Shower Compartments
In alternate roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall farthest from the compartment entry. Grab bars shall not be provided...
-
11B-213.3.1 Toilet compartments
Where toilet compartments are provided, at least five percent but no fewer than one toilet compartment shall comply with Section 11B-604.8.1. In addition to the compartments required...
-
Knee and Toe Clearance
Accessible lavatories and sinks must provide knee and toe clearance for a forward approach (606.2). Consistent with the proposed rule, exceptions from the requirement for forward...
-
608.5.1 Transfer Type Shower Compartments
In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches...