The toe clearance shall extend 19 inches (483 mm) minimum under sinks required to be accessible by Section 11B-212.3. 2. ...
Search Results "Grade 2 Braille"
Filters
Commonly Searched Documents
-
11B-306.2.3 Minimum required depth
-
Sales Counters
Exception 2 acknowledges that check writing surfaces are a type of work surface and that those provided at inaccessible check-out aisles are not required to comply....
-
M305.2.2.2 Side Transfer Supports
Where transfer surfaces are part of an articulating surface, the support shall be permitted to be 15 inches (380 mm) long minimum. 2....
-
202 Existing Buildings and Facilities
Section 202.3 states that each altered element or space is required to meet the applicable scoping provisions of Chapter 2....
-
1016.6 Openings
Openings in the surface of outdoor recreation access routes shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1016.6 Openings. ...
-
New Construction
New Construction The play area guidelines in this guide apply to all newly designed or constructed play areas for children ages 2 and older. ...
-
229.1 General
Glazed openings in residential dwelling units required to comply with 809 shall not be required to comply with 229. 2....
-
What does the Justice Department do to enforce the Voting Rights Act?
Under Section 2 of the Act the Department may sue in federal court to challenge those practices that it has determined are racially discriminatory....
-
407.4.6.1 Location
panel serves more than 16 openings and a parallel approach is provided, buttons with floor designations shall be permitted to be 54 inches (1370 mm) maximum above the finish floor. 2....
-
Technical Memorandum TM 2012-06 Wading Pools
following definition contained in the Texas Administrative Code, Title 25, Part 1, §265.182(157) based on 201.1: 265.182 (157) Wading Pool – A Class D pool that has a maximum depth of 2...
-
Floor [1014.3]
When the floor surface is constructed of asphalt, concrete, or boards, the slope of the floor surface must be no steeper than 1:48 (2 percent) in any direction, regardless of the type of...
-
407.4.6.1 Location
panel serves more than 16 openings and a parallel approach is provided, buttons with floor designations shall be permitted to be 54 inches (1370 mm) maximum above the finish floor. 2....
-
R304.3.1 Turning Space
If the turning space is constrained on 2 or more sides, the turning space shall be 1.2 m (4.0 ft) minimum by 1.5 m (5.0 ft)....
-
608.7 Thresholds
EXCEPTION: A threshold 2 inches (51 mm) high maximum shall be permitted in transfer type shower compartments in existing facilities where provision of a ½ inch (13 mm) high threshold would...
-
Environmental Impact
A Finding of No Significant Impact with respect to the environment has been made in accordance with HUD regulations at 24 CFR Part 50, which implement section 102(2)(C) of the National Environmental...
-
28.1 Q. If an architect or builder chooses to follow the bathroom specifications in Requirement 7...are the other bathrooms in the dwelling unit required to have reinforced walls for grab bars?
Even though Requirement 6 was not repeated under Requirement 7--Guideline 2, it is a separate requirement which must be met in all bathrooms....
-
801.1 Scope
The provisions of Chapter 8 shall apply where required by Chapter 2 or where referenced by a requirement in this code. Advisory 801.1 Scope....
-
M9
[ADA Standards § 4.19.2] Yes No Notes: 1. 48-inch minimum by 66-inch minimum clear floor space for toilet 2. 48-inch minimum by 30-inch minimum clear floor space...
-
229.1 General
Glazed openings in residential dwelling units required to comply with 809 shall not be required to comply with 229. 2....
-
12101(b)(1)
L. 110-325, § 2, Sept. 25, 2008, 122 Stat. 3553, provided that: (1) to carry out the ADA's objectives of providing "a clear and comprehensive national mandate for the elimination of discrimination...