Wheelchairs and Other Power-Driven Mobility Devices Allowing mobility devices into a facility is another type of “reasonable modification” necessary to accommodate people who have disabilities...
Search Results "Wheelchair Seating Space"
-
Wheelchairs and Other Power-Driven Mobility Devices
-
§ 36.406(f)(4)
(4) Stadium-style movie theaters shall locate wheelchair seating spaces and companion seating on a riser or cross-aisle in the stadium section that satisfies at least one of the following...
-
Elevator requirement to new dining area on the mezzanine of an existing facility
Let's also assume that the seating area of the mezzanine dining area you mention contains more than 25% of the total combined seating area and focus on the more difficult question you seem...
-
Actions
Etiquette considered appropriate when interacting with people with disabilities is based primarily on respect and courtesy. Outlined below are tips to help you in communicating with...
-
General Tips for Communicating with People with Disabilities
When introduced to a person with a disability, it is appropriate to offer to shake hands. People with limited hand use or who wear an artificial limb can usually shake hands....
-
208 Parking Spaces
Section 208 specifies the minimum number of parking spaces required to be accessible....
-
11B-609.3 Spacing
The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm) minimum....
-
11B-609.3 Spacing
11B-609.3 Spacing. The space between the wall and the grab bar shall be 1½ inches (38 mm)....
- Nova Health Products LiteRamp 6' Wheelchair and Scooter Ramp (LR6)
-
7(1)(b)
(b) Clearance between counters and all opposing base cabinets, countertops, appliances or walls is at least 40 inches.
-
Accessible Health Care Briefs: CHOOSING AND NEGOTIATING AN ACCESSIBLE FACILITY LOCATION
CHOOSING AND NEGOTIATING AN ACCESSIBLE FACILITY LOCATION June Isaacson Kailes MSW, Associate Director Christie Mac Donald MPP, Senior Policy Analyst Center for Disabilities...
-
§ 38.77(c)
(c) At all doors on level-entry vehicles, and at each entrance accessible by lift, ramp, bridge plate or other suitable means, handrails, stanchions, passenger seats, vehicle driver seat...
-
M305.2.2.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M305.2.2.1 shall be 15 inches (380 mm) long minimum. Transfer supports shall be positioned along 13 ½ inches...
-
M305.2.4.1 Circular Cross Section
Transfer supports with circular cross sections shall have an outside diameter of 1 ¼ inches (32 mm) minimum and 2 inches (51 mm) maximum.
-
M305.2.1.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be capable of supporting transfer on each side of the transfer surface.
-
M305.2.1.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side.
-
M305.2.2.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be 28 inches (710 mm) long minimum and shall be positioned along the width of transfer...
-
Requirement 6 -- Reinforced Walls for Grab Bars
[See subsections ...]
-
206.5.2 Rooms and Spaces
206.5.2 Rooms and Spaces. Within a building or facility, at least one door, doorway, or gate serving each room or space complying with these requirements shall comply with 404....
-
Kompan, Inc. Electronic Playgrounds ICON1012 Space
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Re: SCOTT JOHNSON v. STARBUCKS CORPORATION - AMICUS BRIEF
Providing sufficient space to allow people with disabilities to fully and equally use the counter would certainly not fundamentally alter the nature of any of these. 3) 36.304 - The obligation...
- Pilot Rock T300/T400 Series Round, Pedestal Table With CONTOUR Bench Seats - Using Expanded Steel
-
1010.1 Turning Space
1010.1 Turning Space. A circular turning space 60 inches (1525 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions. ...