[See subsections ...]
Search Results "Sign Clear Floor Space"
-
11B-216 Signs
-
11B-216 Signs
[See subsections ...]
-
Identification Signs: ADA Standard Section 216.9.1
Section 216.9.1 covers scoping requirements in the current ADA Standards for TTY identification signs.
-
11B-703 Signs
[See subsections ...]
-
11B-703 Signs
[See subsections ...]
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...
-
Floor [1014.3]
The floor surface within a camp shelter must be firm and stable....
-
5. Edge Protection
The Access Board sought public input with question 30 in the MDE NPRM preamble, on whether there is diagnostic equipment with wheelchair spaces on raised platforms that does not provide...
-
405.5 Clear Width
405.5 Clear Width. The clear width of a ramp run and, where handrails are provided, the clear width between handrails shall be 36 inches (915 mm) minimum....
-
Public Buildings: ADA Standard Section 217.4.2.1
Section 217.4.2.1 covers scoping requirements in the current ADA Standards for TTYs on the floor of a public building.
-
ADA & Level Boarding Guidance - Platform Height
49 CFR §§37.41-43; 37.9(a), (d); 49 CFR Part 37, App. A (810.5.3) DECEMBER 14, 2011
-
Seton Telephone Sign with ISA
Each sign is carefully engraved with the ISA symbol Setonply® is a tough, stain-resistant multi-layered acrylic and cleans easily with a damp cloth 12"W x 4"H signs are available...
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
703.4.1 Height above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
208 Parking Spaces
that accommodate vans (208.2.4) relocation of requirements for signage to the scoping section on signs (216.5) Section 208.1 exempts spaces used exclusively for buses, trucks, other...
-
11B-410.8 Restriction sign
A sign complying with Section 11B-703.5 shall be posted in a conspicuous place at each landing and within the platform, enclosure stating “No Freight” and include the International Symbol...
-
Access Board: Accessible Parking in Garages
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in it's entirety on the Access Board's website...
-
1010.1.5 Floor elevation
There shall be a floor or landing on each side of a door. Such floor or landing shall be at the same elevation on each side of the door....
-
11B-812.10.4 Location
EV chargers shall be adjacent to, and within the projected width of, the vehicle space being served....
-
A. Passenger Drop-Off Areas
An accessible drop-off area must have a level access aisle that is adjacent and parallel to the vehicle space....
-
11B-812.10.4 Location
EV chargers shall be adjacent to, and within the projected width of, the vehicle space being served. Exceptions: 1....
