A. On a horizontal plane, the center of each individual doorway should be the point of measurement when measuring to an arrival point, whether the doorway is an entrance door to the...
Search Results "Sign Clear Floor Space"
-
11.2 Q. Under the individual building test, at what point of the planned entrance is the measurement taken?
-
2010 ADA Standards - Plan Review Tool - Slopes
2010 ADA Standards - Plan Review Tool - Slopes Click here to view/download the pdf "2010 ADA Standards - Plan Review Tool - Slopes" (774 KB) * * * * * * *
-
Elevator Landing Requirements [§407.2]
Elevator Landing Requirements [§407.2]
-
11B-503.5 Vertical clearance
Vehicle pull-up spaces, access aisles serving them, and a vehicular route from an entrance to the passenger loading zone and from the passenger loading zone to a vehicular exit shall provide...
-
407.8.3.2.2 Knee and Toe Space under ICT with Obstructed Forward Reach
Knee and toe space under ICT shall be 27 inches (685 mm) high minimum, 25 inches (635 mm) deep maximum, and 30 inches (760 mm) wide minimum and shall be clear of obstructions....
- M-D Building Products, Inc. GEN3 SmartTool™ Digital Level
-
11B-503.5 Vertical clearance
Vehicle pull-up spaces, access aisles serving them, and a vehicular route from an entrance to the passenger drop-off and loading zone and from the passenger drop-off and loading zone to...
-
11B-233.3.1.2.6 Public housing facility site impracticality
The remaining ground floor residential dwelling units shall comply with the following requirements: 1. Grab bar reinforcement complying with Section 11B-609. 2. ...
-
1010.1.5 Floor elevation
There shall be a floor or landing on each side of a door. Such floor or landing shall be at the same elevation on each side of the door....
-
Section 36.406(f) Assembly Areas (Section-by-Section Analysis)
As the Department explained in the NPRM, however, this provision was not designed to prohibit temporary seating that increases seating for events (e.g., placing temporary seating on the floor...
- Seton Men's Rest Room ADA Braille Sign with ISA 44988
- Seton Women's Rest Room ADA Braille Sign with ISA 44985
- Seton Unisex Rest Room ADA Braille Sign with ISA 44982
-
11B-410.8 Restriction sign
A sign complying with Section 11B-703.5 _|Signs; Visual Characters|_ shall be posted in a conspicuous place at each landing and within the platform enclosure stating “No Freight” and include...
-
11B-410.8 Restriction sign
A sign complying with Section 11B-703.5 _|Signs; Visual Characters|_ shall be posted in a conspicuous place at each landing and within the platform enclosure stating “No Freight” and include...
-
11B-904.3.4 Identification sign
When not all check-out aisles are accessible, accessible check-out aisles shall be identified by a sign clearly visible to a person in a wheelchair displaying the International Symbol of...
-
11B-904.3.4 Identification sign
When not all check-out aisles are accessible, accessible check-out aisles shall be identified by a sign clearly visible to a person in a wheelchair displaying the International Symbol of...
-
11B-904.3.4 Identification sign
When not all check-out aisles are accessible, accessible check-out aisles shall be identified by a sign clearly visible to a person in a wheelchair displaying the International Symbol of...
- Figure 407.2.3.2 Car Designations on Jambs of Destination-Oriented Elevator Hoistway Entrances – Drawing from the U.S. Access Board
-
11B-703.4.1 Height above finish floor or ground
11B-703.4.1 Height above finish floor or ground....
-
Guidelines for Requirement 4
The Department has adopted the Option One guidelines for Requirement 4 with the following changes: First, the Department has eliminated the specification for maneuvering space if a person...
-
3. Exception to Ramp Running Slope
The MDE Advisory Committee, during its discussion of wheelchair spaces on weight scales, extensively addressed the permissible slopes of ramps on raised platforms....
-
M303.1 General
Diagnostic equipment used by patients seated in a wheelchair shall comply with M303.
-
M303.3.1 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical.