The ability to manage an incline is related to both its slope and its length. Wheelchair users with disabilities affecting arms or with low stamina have serious difficulty using...
Search Results "Sign Clear Floor Space"
-
A4.8.2 SLOPE AND RISE
-
M303.4 Components
Where components of diagnostic equipment are used to examine specific body parts, the components shall be capable of examining the body parts of a patient seated in a wheelchair....
-
M303.3.1 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical.
-
M303.3.2 Beveled
Changes in level between ¼ inch (6.4 mm) high and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2.
-
M303.1 General
Diagnostic equipment used by patients seated in a wheelchair shall comply with M303.
-
68.101(c)(5)(E) Signage at toilet rooms or bathrooms
(E) Signage at toilet rooms or bathrooms shall comply with TAS 703. Toilet rooms or bathrooms serving the leased area which are not accessible shall be provided with signage...
-
68.101(c)(5)(B) Accessible route from parking area(s)
(B) An accessible route from the parking area(s) shall comply with TAS 206 and 402.
-
§ 37.91 Wheelchair locations and food service on intercity rail trains
[See subsections ...]
- Seton Men's Rest Room ADA Braille Sign with ISA 44988
- Seton Women's Rest Room ADA Braille Sign with ISA 44985
- Seton Unisex Rest Room ADA Braille Sign with ISA 44982
-
Floor [1014.3]
The floor surface within a camp shelter must be firm and stable....
-
405.5 Clear Width
405.5 Clear Width. The clear width of a ramp run and, where handrails are provided, the clear width between handrails shall be 36 inches (915 mm) minimum....
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...
-
5. Edge Protection
The Access Board sought public input with question 30 in the MDE NPRM preamble, on whether there is diagnostic equipment with wheelchair spaces on raised platforms that does not provide...
- Figure 407.2.3.2 Car Designations on Jambs of Destination-Oriented Elevator Hoistway Entrances – Drawing from the U.S. Access Board
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
11B-410.8 Restriction sign
A sign complying with Section 11B-703.5 _|Signs; Visual Characters|_ shall be posted in a conspicuous place at each landing and within the platform enclosure stating “No Freight” and include...
-
11B-410.8 Restriction sign
A sign complying with Section 11B-703.5 _|Signs; Visual Characters|_ shall be posted in a conspicuous place at each landing and within the platform enclosure stating “No Freight” and include...
-
11B-904.3.4 Identification sign
When not all check-out aisles are accessible, accessible check-out aisles shall be identified by a sign clearly visible to a person in a wheelchair displaying the International Symbol of...
-
11B-904.3.4 Identification sign
When not all check-out aisles are accessible, accessible check-out aisles shall be identified by a sign clearly visible to a person in a wheelchair displaying the International Symbol of...