Section 36.303 in the final rule codifies the Department's longstanding policies in this area, and includes provisions based on technological advances and breakthroughs in the area of auxiliary...
Search Results "Assembly Area"
2010 ADA Definition
Assembly Area: A building or facility, or portion thereof, used for the purpose of entertainment, educational or civic gatherings, or similar purposes. For the purposes of these requirements, assembly areas include, but are not limited to, classrooms, lecture halls, courtrooms, public meeting rooms, public hearing rooms, legislative chambers, motion picture houses, auditoria, theaters, playhouses, dinner theaters, concert halls, centers for the performing arts, amphitheaters, arenas, stadiums, grandstands, or convention centers.
Filters
Commonly Searched Documents
-
Section 36.303 Auxiliary Aids and Services (Section-by-Section Analysis)
-
Alterations [4.1.6(1)(f) & (k)]
from the requirement for an elevator in buildings with less than 3 stories or with less than 3,000 square feet per floor applies to altered facilities as well, including those where an area...
-
4.6 Swimming Pools
If the accessible entrance is in the shallow end of the pool and you want to use the lap lanes, then you may have to talk with staff about how you should get into the area of the pool you...
-
Protruding Objects and Trails
Protruding objects are defined as constructed features such as signs that extend into the clear width area of a trail, resting interval, or passing space between 27 inches (685 millimeters...
-
11B-234.3 Minimum number
These rides are not exempt from the other provisions in 234 requiring an accessible route to the load and unload areas and to the ride....
-
11B-223.1 General
lack of a design requirement does not mean that covered entities are not required to provide services to people with disabilities where accessible rooms are not dispersed in specialty areas...
-
1136A.2 Switch and control heights
Controls or switches intended to be used by the occupant of the room or area to control lighting and receptacle outlets, appliances, alarms or cooling, heating and ventilating equipment...
-
1136A.2 Switch and control heights
Controls or switches intended to be used by the occupant of the room or area to control lighting and receptacle outlets, appliances, alarms or cooling, heating and ventilating equipment...
-
11B-234.3 Minimum number
These rides are not exempt from the other provisions in Section 11B-234 requiring an accessible route to the load and unload areas and to the ride....
-
11B-201.1 Scope
All areas of newly designed and newly constructed buildings and facilities and altered portions of existing buildings and facilities shall comply with these requirements....
-
Auditorium accessible seating
Graphic description of level seating; The seating area shows rows to have access aisle at either end of a row and there are six rows. ...
-
§382.91(d)
., between the terminal entrance and the gate, between gate and aircraft, from gate to a baggage claim area), you must assist passengers who are unable to carry their luggage because of...
-
Door and Signal Timing
Destination-oriented elevators may have call buttons located outside elevator landing areas and have enhanced programming features for the response time of cars....
-
1. Location
Remember, walkways include areas where people must walk to access bus stops and other public transportation stops, so, where necessary, curb ramps must also be provided to enable people...
-
Accessible Routes
must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level, doors, egress, and areas...
-
806.2.4 Toilet and Bathing Facilities
Toilet and bathing fixtures required to comply with 603 through 610 shall be permitted to be located in more than one toilet or bathing area, provided that travel between fixtures does not...
-
806.2.4 Toilet and Bathing Facilities
Toilet and bathing fixtures required to comply with 603 through 610 shall be permitted to be located in more than one toilet or bathing area, provided that travel between fixtures does not...
-
Accessible Rides
must provide at least one wheelchair space, or at least one ride seat designed for transfer, or a transfer device designed to transfer a person using a wheelchair from the load and unload area...
-
5.2.2 Transfer Surface Size Recommendations for M302
Depending on the configuration of the equipment, the transfer surface may coincide with the seat area of an examination chair....
-
20. Q: What about holding cells and jails that are not accessible?
If meeting and/or interrogation rooms are provided, those areas should also be accessible for use by arrestees, family members, or legal counsel who have mobility disabilities....
-
407.2.2.1 Visible and Audible Signals
Where in-car signals are provided, they shall be visible from the floor area adjacent to the hall call buttons. EXCEPTIONS: 1....
-
Accessible Routes to Programs and Services
The accessible route should be the same, or be located in the same area as, the general route used by people without mobility disabilities....
-
11B-602.9 Pedestrian protection
The protected area within which a drinking fountain is located shall be 32 inches (813 mm) wide minimum and 18 inches (457 mm) deep minimum, and shall comply with Section 11B-305.7....