One-piece drawn construction with exposed surfaces in architectural satin finish. Snap over flanges to conceal mounting screws....
Search Results "Fire-Building Surface"
-
Bradley Grab Bars 1 1/2" with Concealed Mounting 812
-
AJW Architectural Products UG120-U Series UG120-U 29" Swing-Up, 1.25" Diameter Grab Bar - Configuration U
Gripping Surface: Standard surface is satin finish. Use suffix X for peened grip....
-
American Safety Tread Co., Inc. Type T-24 Contrasting Stripe
Barrier Free: The designs shown are in compliance with the Barrier-Free Code, ensuring those physically impaired complete access to public buildings....
-
§100.205(b)
building entrance....
-
TTY Shelf: ADA Standard Section 704.5
The telephone handset shall be capable of being placed flush on the surface of the shelf....
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
11B-704.5 TTY shelf
The telephone handset shall be capable of being placed flush on the surface of the shelf....
-
11B-704.5 TTY shelf
The telephone handset shall be capable of being placed flush on the surface of the shelf....
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
11B-230.1 General
Where a two-way communication system is provided to gain admittance to a building or facility or to restricted areas within a building or facility, the system shall comply with Section 11B...
-
11B-230.1 General
Where a two-way communication system is provided to gain admittance to a building or facility or to restricted areas within a building or facility, the system shall comply with Section 11B...
-
11B-230.1 General
Where a two-way communication system is provided to gain admittance to a building or facility or to restricted areas within a building or facility, the system shall comply with Section 11B...
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
R405.2.1 General
Space under an element between the finish surface and 230 mm (9 in) above the finish surface shall be considered toe clearance and shall comply with R405.2....
-
1008.2.5.3.2 Handrail Height
The top of handrail gripping surfaces shall be 20 inches (510 mm) minimum and 28 inches (710 mm) maximum above the ramp surface....
-
11B-1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (279 mm) minimum and 18 inches (457 mm) maximum measured to the top of the surface from the ground or floor surface....
-
11B-1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (279 mm) minimum and 18 inches (457 mm) maximum measured to the top of the surface from the ground or floor surface....
-
11B-1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (279 mm) minimum and 18 inches (457 mm) maximum measured to the top of the surface from the ground or floor surface....
-
Alertus Voice Public Address System Interface
Government buildings and schools are often equipped with voice public address systems; however, their facilities are scattered across a wide geographic area without any unified control capability...
-
407.3.1 Identification (Section-by-Section Analysis)
It also would require key surfaces outside active areas of display screens to be raised above their surrounding surfaces....
-
1. Public Rights-of-Way
Other highlights in the requirements include accessible pedestrian signals, curb ramps and blended transitions, detectable warning surfaces, crosswalks at roundabouts, on-street parking,...
-
1. Public Rights-of-Way
Other highlights in the requirements include accessible pedestrian signals, curb ramps and blended transitions, detectable warning surfaces, crosswalks at roundabouts, on-street parking,...
-
B. The ADA Standards for Accessible Design
The Access Board issued updated ADA Accessibility Guidelines in 2004 (2004 ADAAG), with the goal of harmonizing existing federal accessibility standards and model building codes....
