The diameter or width of the gripping surfaces of a handrail or grab bar shall be 1-1/4 in to 1-1/2 in (32 mm to 38 mm), or the shape shall provide an equivalent gripping surface....
Search Results "End Transfer Surface"
Filters
Commonly Searched Documents
-
4.26.2* SIZE AND SPACING OF GRAB BARS AND HANDRAILS
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
11B-705.1.1.3 Color and contrast
Detectable warning surfaces shall comply with Section 11B-705.1.1.3.1. The material used to comply with this section shall be an integral part of the detectable warning surface....
-
Salsbury Industries 62000 Series Double Tier 1 Wide Standard Metal Lockers
and combination or key padlocks Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Options Sloping hoods, end...
-
Salsbury Industries Series Triple Tier 1 Wide Standard Metal Lockers
and combination or key padlocks Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Options Sloping hoods, end...
-
Salsbury Industries 62000 Series Double Tier 3 Wide Standard Metal Lockers
and combination or key padlocks Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Options Sloping hoods, end...
-
Salsbury Industries 63000 Series Triple Tier 3 Wide Standard Metal Lockers
and combination or key padlocks Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Options Sloping hoods, end...
-
2. Mirrors
Mirrors: If provided, mirrors need to be mounted with the bottom edge of the reflecting surface no higher than 40 inches above the floor....
-
705.1 General
Detectable warnings shall consist of a surface of truncated domes and shall comply with 705. Figure 705.1 Size and Spacing of Truncated Domes...
-
Boat Launch Ramp
A sloped surface designed for launching and retrieving trailered boats and other water craft to and from a body of water....
-
Confirm that the vibrotactile indications work
Confirm that the vibrotactile indications work The tactile arrow or vibrating surface should vibrate rapidly only during the walk interval for the street....
-
R305.2.6 Boarding Platforms
At boarding platforms for buses and rail vehicles, detectable warning surfaces shall be placed at the boarding edge of the platform....
-
e-i
Is the curb ramp surface at least 36 inches wide, excluding flared sides? [ADA Standards § 4.7.3] Yes No...
-
11B-502.6.4 Marking
Each accessible car and van space shall have surface identification complying with either Section 11B-502.6.4.1 or 11B-502.6.4.2....
-
RAMP
A walking surface that has a running slope steeper than one unit vertical in 20 units horizontal (5-percent slope)....
-
11B-502.6.4 Marking
Each accessible car and van space shall have surface identification complying with either Section 11B-502.6.4.1 or 11B-502.6.4.2. ...
-
11B-502.6.4 Marking
Each accessible car and van space shall have surface identification complying with either Section 11B-502.6.4.1 or 11B-502.6.4.2....
-
RAMP
A walking surface that has a running slope steeper than one unit vertical in 20 units horizontal (5-percent slope)....
-
III. ACTIONS TO REMEDY NONCOMPLIANCE WITH ACCESSIBILITY REQUIREMENTS AT QUIKTRIP STORES
Effective Date of this Consent Decree will achieve certification of compliance with the ADA Standards and the elements of Paragraph 13 of this Consent Decree by the ILA by no later than the end...
-
Coverage and Definition of “Flight”
NPRM proposed to cover the activities of foreign carriers with respect to a “flight,” defined as a continuous journey, in the same aircraft or using the same flight number that begins or ends...
-
M303.2.3 Depth (Section-by-Section Analysis)
requirements based on how the wheelchair space is entered, made an editorial change to clarify that front or rear entry is where the wheelchair space entry and exit is provided at only one end...
-
Q3: Roadway Resurfacing Alteration Project and Curb Ramp Improvements
If the resurfacing affects the crosswalk, even if it is not the full roadway width, then curb ramps must be provided at both ends of the crosswalk. See 28 CFR 35.151(i). ...
-
1115B.4.5, Item 2
An in-tub seat or a seat at the head end of the tub shall be provided as shown in Figures 11B-8 and 11B-9....
-
How to use this Manual
Also, the following appendices appear at the end of the manual: Appendix I: “Tips for Air Travelers with Disabilities” as they relate to the most commonly-used accommodations, facilities...
