The ground or deck surface shall extend 12 inches (305 mm) minimum beyond the inside face of the railing....
Search Results "Shall"
-
1005.3.2 Extended Ground or Deck Surface
-
902.4.1 Clear Floor or Ground Space
A clear floor space complying with 305 positioned for forward approach shall be provided....
-
503.4 Floor and Ground Surfaces
Vehicle pull-up spaces and access aisles serving them shall comply with 302. Access aisles shall be at the same level as the vehicle pull-up space they serve....
-
Work Area Equipment
As used in this document, this term shall apply only to equipment that is permanently installed or built-in in employee work areas....
-
Relationship to Accessible Routes: ADA Standard Section 502.7
Section 502.7 covers the current ADA Standards for the relationship between accessible parking spaces and accessible routes.
-
1009.10 Directional signage
Directional signage complying with Chapter 11B, Section 11B-703.5 indicating the location of all other means of egress and which of those are accessible means of egress shall be provided...
-
11B-604.8.1.1.3 Maneuvering space with end-opening door
located in the front wall or partition (facing the water closet), either in-swinging or out-swinging, a minimum 60 inches (1524 mm) wide and 48 inches (1219 mm) deep maneuvering space shall...
-
Extended Floor or Ground Surface: ADA Standard Section 405.9.1
Section 405.9.1 covers the current ADA Standards for extended floor or ground surface of the ramp run or landing.
-
11B-604.8.1.1.3 Maneuvering space with end-opening door
located in the front wall or partition (facing the water closet), either in-swinging or out-swinging, a minimum 60 inches (1524 mm) wide and 48 inches (1219 mm) deep maneuvering space shall...
-
404.2.10 Door and Gate Surfaces
Parts creating horizontal or vertical joints in these surfaces shall be within 1/16 inch (1.6 mm) of the same plane as the other. Cavities created by added kick plates shall be capped....
-
1009.9 Signage
Signage indicating special accessibility provisions shall be provided as shown: 1....
-
404.2.10 Door and Gate Surfaces
Parts creating horizontal or vertical joints in these surfaces shall be within 1/16 inch (1.6 mm) of the same plane as the other....
-
11B-404.2.9 Door and gate opening force
The powered leaf(s) shall be located closest to the accessible route. a. Powered doors shall comply with Section 11B-404.3....
-
11B-404.2.9 Door and gate opening force
The powered leaf(s) shall be located closest to the accessible route. a. Powered doors shall comply with Section 11B-404.3....
-
11B-404.2.9 Door and gate opening force
The powered leaf(s) shall be located closest to the accessible route. a. Powered doors shall comply with Section 11B-404.3....
-
11B-604.5.2 Rear wall
The rear wall grab bar shall be 36 inches (914 mm) long minimum and extend from the centerline of the water closet 12 inches (305 mm) minimum on one side and 24 inches (610 mm) minimum on...
-
11B-604.5.2 Rear wall
The rear wall grab bar shall be 36 inches (914 mm) long minimum and extend from the centerline of the water closet 12 inches (305 mm) minimum on one side and 24 inches (610 mm) minimum on...
-
11B-703.4.2 Location
Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side....
-
11B-703.4.2 Location
Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side....
-
11B-703.4.2 Location
Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side....
-
F221.2.3 Lines of Sight and Dispersion
Wheelchair spaces shall provide lines of sight complying with 802.2 and shall comply with F221.2.3. In providing lines of sight, wheelchair spaces shall be dispersed....
-
703.4.2 Location
Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side....
-
11B-502.3.4 Location
Access aisles shall not overlap the vehicular way....
-
11B-502.3.4 Location
Access aisles shall not overlap the vehicular way....