A transfer space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer platform surface and shall...
Search Results "Curb Ramp Surface"
-
Transfer Space: ADA Standard Section 1009.5.2
-
GRADE (Adjacent Ground Elevation)
[DSA-AC] The lowest point of elevation of the finished surface of the ground, paving or sidewalk within the area between the building and the property line or, when the property line is...
-
11B-1009.5.2 Transfer space
A transfer space of 60 inches (1524 mm) minimum by 60 inches (1524 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer platform surface and shall...
-
505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum. Figure 505.5 Handrail Clearance...
-
Background
Consideration was given to the need to add material or patch the surfaces after major damage....
-
Recommendations for Future Research
surface...
-
11B-307.3 Post-mounted objects
Exception: The sloping portions of handrails serving stairs and ramps shall not be required to comply with Section 11B-307.3....
-
11B-307.3 Post-mounted objects
Exception: The sloping portions of handrails serving stairs and ramps shall not be required to comply with Section 11B-307.3....
-
Post-Mounted Objects: ADA Standard Section 307.3
Section 307.3 covers the current ADA Standards for the protrusion limits for post-mounted objects.
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
-
11B-101.2 Reserved
Examples of steps to remove barriers include, but are not limited to, the following actions – (1) Installing ramps; (2) Making curb cuts in sidewalks and entrances; (3) ...
-
11B-101.2 Reserved
Examples of steps to remove barriers include, but are not limited to, the following actions – 1) Installing ramps; 2) Making curb cuts in sidewalks and entrances; 3) Repositioning...
-
11B-101.2 Reserved.
Examples of steps to remove barriers include, but are not limited to, the following actions – 1) Installing ramps; 2) Making curb cuts in sidewalks and entrances; ...
-
101.2 Effect on Removal of Barriers in Existing Facilities
Examples of steps to remove barriers include, but are not limited to, the following actions – (1) Installing ramps; (2) Making curb cuts in sidewalks and entrances; (3) Repositioning...
-
Comments to the NPRM
A number of commenters said the rule would force paratransit operators to operate in a door-to-door mode, eliminating, as a practical matter, the curb-to-curb service option....
-
9. Platform lift
Platform lift 4.11 May be used in lieu of an elevator or ramp under certain conditions....
-
10.2.2(1)
(1) Bus stop sites shall be chosen such that, to the maximum extent practicable, the areas where lifts or ramps are to be deployed comply with section 10.2.1(1) and (2)....
-
§ 38.29(a)
(a) Interior handrails and stanchions shall permit sufficient turning and maneuvering space for wheelchairs and other mobility aids to reach a securement location from the lift or ramp....
-
GUARD [DSA-AC, HCD 1, HCD 2 & HCD 1-AC] OR GUARDRAIL
A building component or a system of building components located at or near the open sides of elevated walking surfaces that minimizes the possibility of a fall from the walking surface to...
-
Mockett DH3/BB Square Door Handle Installation Video
Hearty grip surface and solid, high density material and construction....
-
Introduction
Curb ramps providing access to streets and sidewalks are a basic city service....
-
What Contributes to the Determination of "Readily Achievable"?
Never exceeds the new construction requirements The Department's regulation contains a list of 21 examples of modifications that may be readily achievable: 1) Installing ramps...
-
5.9 Standing Support Recommendations for M304 Diagnostic Equipment Used by Patients in a Standing Position
The proposed provision requires standing supports be provided on each side of the standing surface....
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....