The grab bars were frequently used as handhelds during the transfer process and for one person it made the difference of being able to do a non-level transfer to the platform....
Search Results "Non-Positive Shut Off"
-
Grab Bar and Backrest Evaluation
-
11B-703.6.2 Finish and contrast
Pictograms and their field shall have a non-glare finish. Pictograms shall contrast with their field with either a light pictogram on a dark field or a dark pictogram on a light field....
-
M305.4 Leg Supports (Section-by-Section Analysis)
The MDE NPRM proposed that where stirrups are provided, they must provide a method to support, position, and secure the patients legs....
-
5.1.2 Transfer Surface High Height Recommendations for M301 and M302
5.1.2 Transfer Surface High Height Recommendations for M301 and M302 The Committee recommends an adjustable height range with an upper height measuring at least 25...
-
5.1.3 Transfer Surface Low Height Options for M301 and M302
5.1.3 Transfer Surface Low Height Options for M301 and M302 The Committee did not agree on a final low height recommendation. Rationale for final recommendation (more detail...
-
5.1.3 Transfer Surface Low Height
5.1.3 Transfer Surface Low Height. No agreement on final low height
-
5.1.2 Transfer Surface High Height
5.1.2 Transfer Surface High Height. The transfer surface should have an adjustable height range with an upper height measuring at least 25 inches.
-
5.1.1 Transfer Surface Height Adjustability
5.1.1 Transfer Surface Height Adjustability. The transfer surface should have an adjustable height in small virtually continuous increments.
-
5.9.1 Standing Supports Recommendation In Reference To Mammography Equipment
Instead, positioning supports should be required....
-
M305.5 Head and Back Support
Where the diagnostic equipment is used in a reclined position, head and back support shall be provided....
-
M301.3.3 Head and Back Support
Where the diagnostic equipment is used in a reclined position, head and back support shall be provided....
-
T204.1 General
Doorways on non-rail vehicles shall comply with T204....
-
T203.1 General
Steps on non-rail vehicles shall comply with T405....
-
T405 Steps
[See subsections ...]
-
T403 Lifts
[See subsections ...]
-
T212 Seat Belts and Shoulder Belts
[See subsections ...]
-
Equipment and furniture.
Question seven of the ANPRM asked for comment on whether regulatory guidance is needed with respect to the acquisition and use of mobile, portable, and other free-standing equipment...
-
M305.2.5 Surface Hazards (Section-by-Section Analysis)
Sharp edges or abrasive elements may injure and cause the patient to lose their grip during positioning or transfer.”...
-
A2
A2. Is the vehicle pull-up area relatively level (1:50 or 2% maximum slope in all directions)? Yes No
-
5.3.2.2 Transfer Sides for Imaging Equipment
5.3.2.2 Transfer Sides for Imaging Equipment. The transfer surface should be provided on at least one long side of the table.
-
3.2 Getting on the Table
Accessible tables and chairs that lower to 17-20 inches from the floor to the top of the cushion can make getting on and off them easier. ...
-
T302.1 General
Walking surfaces in non-rail vehicles shall comply with T302. EXCEPTION: Walking surfaces on lifts shall not be required to comply with T302....
-
11B-707.9.1 General
Point-of-sale systems that include a video touch screen or any other non-tactile keypad shall be equipped with either of the following:...
-
M302.2.1 Adjustability
A low transfer position at a height of 17 inches (430 mm) minimum and 19 inches (485 mm) maximum; B. A high transfer position at 25 inches (635 mm); and C....