Section 407.4.8.1.1 covers the current ADA Standards for size of visible elevator car position indicators.
Search Results "Non-Positive Shut Off"
Commonly Searched Documents
- 
    
  
  Size: ADA Standard Section 407.4.8.1.1
  
- 
    
  
  11B-407.4.8.1.1 Size
  Characters shall be ½ inch (12.7 mm) high minimum. 
- 
    
  
  11B-411.4.8.1 Visible indicators
  Visible indicators shall comply with Section 11B-411.4.8.1. 
- 
    
  
  5.3.1 Permitted Obstructions to Transfer Sides for M301 and M302
  The 2010 Standards provide a gap of 3 inches between the edge of a shower seat and the shower compartment entry, and the gap does not appear to interfere with transferring onto and off the... 
- 
    
  
  M305.3.1.1 Horizontal Position
  The length of gripping surfaces on horizontal standing supports shall be 4 inches (100 mm) minimum except for diagnostic equipment containing a wheelchair space which shall comply... 
- 
    
  
  M305.3.2.1 Horizontal Position
  The height of the top of the gripping surface on horizontal standing supports shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum above the standing surface. 
- 
    
  
  5.9.1 Standing Supports In Reference To Mammography Equipment
  To be useful, positioning supports must be shaped for grasping, positioned within reach range of all users, and be 12 inches long minimum when located on the moving C-arm or 18 inches long... 
- 
    
  
  Furnishings and Equipment
  DOJ’s ADA regulations include requirements that may impact non-fixed elements, such as providing accessible medical equipment, including examination tables and chairs, to provide persons... 
- 
    
  
  5.1 Transfer Surface Height
  5.1 Transfer Surface Height 
- 
    
  
  5.1.4 Transfer Surface Height Measurement
  5.1.4 Transfer Surface Height Measurement. The transfer surface height should be measured from the floor to the highest point on the seat in an uncompressed state, inclusive of... 
- 
    
  
  M305.2.2 Length
  The length of transfer supports shall comply with M305.2.2.1 or M305.2.2.2. 
- 
    
  
  5.5.1 Armrest Provision for M302
  5.5.1 Armrest Provision for M302 Description: Diagnostic equipment used by patients in a seated position such as exam chairs typically have armrests.... 
- 
    
  
  Scope: ADA Standard Section 201.1
  Section 201 discusses the scope of the ADA Standards. 
- 
    
  
  11B-233.3.1.2 Residential dwelling units with adaptable features
  In facilities with residential dwelling units, adaptable residential dwelling units complying with Sections 11B-809.6 through 11B-809.12. shall be provided as required by Sections... 
- 
    
  
  Armrests (M302.3.2)
  M302.3.2 would require armrests to be provided on diagnostic equipment used by patients in a seated position.... 
- 
    
  
  H. Chapter 7: Communication Features
  Chapter 7 in the 2016 Non-Rail Vehicle Guidelines establishes technical requirements for characters on signs, the International Symbol of Accessibility, and vehicular announcement systems... 
- Aqua Creek Scout Pool and Spa Lift Informational Video
- S.R. Smith PAL Pool Lift Video 4: Resolution
- S.R. Smith PAL Pool Lift Video 1: Installation and Operation
- S.R. Smith PAL Pool Lift Video 3: Advanced Troubleshooting
- S.R. Smith PAL Pool Lift Video 2: Basic Troubleshooting
- 
    
  
  Costs and Benefits
  Orders 12866 and 13563, the Access Board prepared a final regulatory assessment (Final RA) to assess the likely costs and benefits of new or revised accessibility requirements in the 2016 Non-Rail... 
- 
    
  
  M305.2.8 Fittings
  Transfer supports shall not rotate within their fittings when in place for transfer. 
- 
    
  
  M305.2.7 Clearance
  Clearance between the transfer support gripping surface and adjacent surfaces or obstructions shall be 1 ½ inches (38 mm) minimum. 
