M305 in the final rule provides the technical requirements for transfer supports, standing supports, leg supports, and head and back supports....
Search Results "Leg Supports"
Commonly Searched Documents
-
M305 Supports (Section-by-Section Analysis)
-
Transfer Supports Location and Configuration M301.3 and M302.3
Transfer Supports Location and Configuration M301.3 and M302.3 Location of the transfer supports shall be a minimum of 6 inches to a maximum of 19 inches from the top of the transfer...
-
11B-1008.3.2.3 Transfer supports
At least one means of support for transferring shall be provided. Advisory 11B-1008.3.2.3 Transfer supports....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-407.4.10.3 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...
-
11B-1008.3.1.4 Transfer supports
At least one means of support for transferring shall be provided....
-
11B-407.4.10.2 Surfaces
Support rails shall be smooth and any surface adjacent to them shall be free of sharp or abrasive elements....
-
b. Positioning Supports
The Access Board noted in the MDE NPRM preamble that it was considering adding positioning supports to the final rule and sought public input with question 24 on whether positioning supports...
-
M305 Supports
M305 provides the technical criteria for transfer supports and standing supports....
-
Back Support
It was also recommended that the criteria for back support, which were included in the specifications for bench size, be relocated into a separate provision specific to back support....
-
5.4 Transfer Supports
5.4 Transfer Supports....
-
M305.2 Transfer Supports
Transfer supports shall comply with M305.2....
-
M305.2 Transfer Supports
Transfer supports shall comply with M305.2....
-
602.3 Electronic Support Documentation
Documentation in electronic format, including Web-based self-service support, shall conform to Level A and Level AA Success Criteria and Conformance Requirements in WCAG 2.0 (incorporated...
-
602.3 Electronic Support Documentation
Documentation in electronic format, including Web-based self-service support, shall conform to all Level A and Level AA Success Criteria and all Conformance Requirements in WCAG 2.0 (incorporated...
-
5.4 Transfer Supports Recommendations
5.4 Transfer Supports Recommendations...
-
903.4 Back Support
903.4 Back Support. The bench shall provide for back support or shall be affixed to a wall....
-
903.4 Back Support
The bench shall provide for back support or shall be affixed to a wall....
-
602 Support Documentation (Section-by-Section Analysis)
602 Support Documentation (Section-by-Section Analysis) This is an introductory section....
-
603 Support Services (Section-by-Section Analysis)
603 Support Services (Section-by-Section Analysis) This is an introductory section....
-
903.4 Back Support
The bench shall provide for back support or shall be affixed to a wall....
-
Additional Technical Criteria Considered for Transfer Supports
As discussed below, the Access Board is considering whether additional technical criteria would be appropriate for transfer supports....
-
602.3 Electronic Support Documentation (Section-by-Section Analysis)
602.3 Electronic Support Documentation (Section-by-Section Analysis) This section proposes to require documentation in electronic formats—including Web-based self-service support and...
-
11B-407.4.10 Support rail
Support rails shall be provided on at least one wall of the car. Advisory 11B-407.4.10 Support rail....