The tops of accessible tables and counters shall be from 28 in to 34 in (710 mm to 865 mm) above the finish floor or ground....
Search Results "Fixed Table"
-
4.32.4* Height of Tables or Counters
-
Seating [4.32.2] and Knee Clearance [4.32.3]
Seating [4.32.2] and Knee Clearance [4.32.3] Knee space at least 27 inches high is required for a depth of 19 inches. The over-the-surface reach is limited to 25 inches if at...
-
Height of Tables or Counters [4.32.4]
Height of Tables or Counters [4.32.4] Counter and table surface heights (28 to 34 inches) should be specified in consideration of the intended use....
-
5.1* General
Where fixed tables (or dining counters where food is consumed but there is no service) are provided, at least 5 percent, but not less than one, of the fixed tables (or a portion of the dining...
-
5.1 GENERAL
In addition to the requirements of 4.1 to 4.33, the design of at least 5 percent of all fixed seating or tables in a restaurant or cafeteria shall comply with 4.32....
-
Reading and Study Areas [8.2]
Reading and Study Areas [8.2] Access is required to at least 5% of fixed tables and study carrels....
-
Dining Surfaces and Work Surfaces: ADA Standard Section 226
Section 226 covers scoping requirements in the current ADA Standards for dining surfaces and work surfaces.
-
General: ADA Standard Section 226.1
Section 226.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for dining surfaces and work surfaces.
-
Dispersion: ADA Standard Section 226.2
Section 226.2 covers scoping requirements in the current ADA Standards for dispersion of dining surfaces and work surfaces.
-
Facility
In lounges, bars, and restaurants, low tables are required (at least 5% of the total number of tables). Pedestal tables rarely comply. A lower counter for check-in is required....
-
Picnic Tables
Measure table clearance from the table seat out. You may reduce the table clear space to 36 inches (915 millimeters) if there is a condition for an exception....
-
902 Dining Surfaces and Work Surfaces
-
902.1 General
Dining surfaces include, but are not limited to, bars, tables, lunch counters, and booths....
-
902.2 Clear Floor or Ground Space
A clear floor space complying with 305 positioned for a forward approach shall be provided. Knee and toe clearance complying with 306 shall be provided.
-
902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground.
-
902.4 Dining Surfaces and Work Surfaces for Children's Use
Accessible dining surfaces and work surfaces for children's use shall comply with 902.4. EXCEPTION: Dining surfaces and work surfaces that are used primarily by children 5 years...
-
902.4.1 Clear Floor or Ground Space
A clear floor space complying with 305 positioned for forward approach shall be provided. Knee and toe clearance complying with 306 shall be provided, except that knee clearance 24...
-
902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground....
-
11B-226 Dining surfaces and work surfaces.
-
11B-226 Dining surfaces and work surfaces
-
11B-226 Dining surfaces and work surfaces
-
11B-226 Dining surfaces and work surfaces
-
11B-226.1 General
to procure or adjust work stations such as desks, laboratory and work benches, fume hoods, reception counters, teller windows, study carrels, commercial kitchen counters, and conference tables...
-
11B-226.1 General
to procure or adjust work stations such as desks, laboratory and work benches, fume hoods, reception counters, teller windows, study carrels, commercial kitchen counters, and conference tables...