Where the diagnostic equipment is used in a reclined position, head and back support shall be provided and shall comply with M305.5....
Search Results "Back Support"
Filters
Commonly Searched Documents
-
M301.3.3 Head and Back Support
-
Effect of Handhelds on Transfer Height
For protocol C the medium and short back rests were almost equally preferred....
-
M301.3.3 Head and Back Support (Section-by-Section Analysis)
In the MDE NPRM the Access Board proposed to place the requirements for head and back support for diagnostic equipment used by patients in the supine, prone, or side-lying position in M301...
-
M305.5 Head and Back Support (Section-by-Section Analysis)
(Section-by-Section Analysis – M302.3.3), the technical requirements for head and back supports from M301 and M302 have been relocated to M305 Supports....
-
11B-407.4.10 Support rail
Support rails shall be provided on at least one wall of the car. Advisory 11B-407.4.10 Support rail....
-
11B-607.4.1.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
11B-607.4.2.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
Transfer Supports: ADA Standard Section 1008.4.5
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
11B-411.4.10 Support rail
Support rails complying with Section 11B-407.4.10 shall be provided on at least one wall of the car....
-
11B-1008.4.5 Transfer supports
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
E. M305 Supports
M305 provides the technical requirements for supports on medical diagnostic equipment....
-
Transfer Supports: ADA Standard Section 1008.3.2.3
At least one means of support for transferring shall be provided. Advisory 1008.3.2.3 Transfer Supports....
-
Transfer Supports: ADA Standard Section 1008.3.1.4
At least one means of support for transferring shall be provided. ...
-
11B-1008.3.2.3 Transfer supports
At least one means of support for transferring shall be provided. Advisory 11B-1008.3.2.3 Transfer supports....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-407.4.10.3 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...
-
11B-1008.3.1.4 Transfer supports
At least one means of support for transferring shall be provided....
-
11B-407.4.10.2 Surfaces
Support rails shall be smooth and any surface adjacent to them shall be free of sharp or abrasive elements....
-
b. Positioning Supports
The Access Board noted in the MDE NPRM preamble that it was considering adding positioning supports to the final rule and sought public input with question 24 on whether positioning supports...
-
M305 Supports
M305 provides the technical criteria for transfer supports and standing supports....
-
Benches [1011.2]
Although there are no technical requirements for the bench itself, providing a bench with at least one armrest and back support that runs the full length of the bench is helpful to people...
-
602.3 Electronic Support Documentation
Documentation in electronic format, including Web-based self-service support, shall conform to Level A and Level AA Success Criteria and Conformance Requirements in WCAG 2.0 (incorporated...
-
602.3 Electronic Support Documentation
Documentation in electronic format, including Web-based self-service support, shall conform to all Level A and Level AA Success Criteria and all Conformance Requirements in WCAG 2.0 (incorporated...