The intended scope of work and technical feasibility are key factors in determining compliance in alterations to existing elevators....
Search Results "Kitchen Work Surface"
Filters
Commonly Searched Documents
-
Alterations [4.1.6(1)(f) & (k)]
-
Introduction
TransCen’s work represents the intersection of grassroots implementation and national policy and initiatives....
-
3.13(a) Placement of Wheelchair Spaces
Placement of Wheelchair Spaces Each wheelchair space shall comply with the size requirements set forth in § 4.33.2 of the Standards, be level and satisfy the floor surface requirements...
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
Landings
Landings Landings are the level surfaces at the top and bottom of each ramp run....
-
505.10.2 Top Extension at Stairs
Extensions shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight....
-
505.10.3 Bottom Extension at Stairs
Extension shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight....
-
1132A.4, Item 1
., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than ½ inch (12.7 mm) of change in height between floor surfaces....
-
Eliminating Hazards [4.26.4]
Eliminating Hazards [4.26.4] Handrails, grab bars, and adjacent surfaces cannot have any sharp or abrasive elements....
-
2.9.1 Natural Elements
However, safety regulations or Forest Service construction and maintenance standards may define clear space and limit the allowable extension of natural protruding objects over the ORAR surface...
-
Beach Access Route
A continuous, unobstructed path designed for pedestrian use that crosses the surface of a beach or that leads from a pedestrian access point to the high tide level at tidal beaches; mean...
-
505.10.2 Top Extension at Stairs
Extensions shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight....
-
505.10.3 Bottom Extension at Stairs
Extension shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight. ...
-
1132A.4, Item 1
., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than ½ inch (12.7 mm) of change in height between floor surfaces....
-
11B-505.10.2 Top extension at stairs
Extensions shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight. ...
-
11B.707.7.1.3 Horizontally mounted display screen
60 degrees to 90 degrees (horizontal) from vertical, the center line of the display screen and other display devices shall be no more than 34 inches (864 mm) above the floor or ground surface...
-
11B-505.10.2 Top extension at stairs
Extensions shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight....
-
Don-Jo Mfg., Inc. 2-3/4" Hospital Latch 4500
Number 4500 Back set 2-3/4" Material Brass Size 2-3/4" x 4-1/2" Shelf pack 1 Features UL Listed, Works...
-
1.9.1.1.5
In such cases, the code in place on the date of any construction would be the effective code for such work....
-
QUESTION: WHAT MEANS MAY BE USED TO COMMUNICATE WITH COMPLAINT RESOLUTION OFFICIALS (CROs)?
For example, a variety of electronic means of communication could work....
-
TECHNIQUES FOR OFFICERS TO COMMUNICATE EFFECTIVELY
Officers must review and have a working knowledge of the publication Communicating with People Who Are Deaf or Hard of Hearing: ADA Guide for Law Enforcement Officers. ...
-
904.4 Sales and Service Counters
EXCEPTION: In alterations, when the provision of a counter complying with 904.4 would result in a reduction of the number of existing counters at work stations or a reduction of the number...
-
1.1.3 Scope
In alteration projects, these provisions apply to the area of new work, and include the path of travel requirements found in Section 11B-202.4....
-
1.1 Balance of System (BOS) Equipment
“Projects consisting only of . . . electrical work not involving the placement of switches or receptacles . . . shall not be required to comply with 11B-202.4. unless they affect the usability...
