Section 1008.2.6 of the 2010 Standards provides technical requirements for accessible ground surfaces for play areas on accessible routes, clear floor or ground spaces, and turning spaces...
Search Results "Floor Button"
Commonly Searched Documents
- 
    
  
  Ground Surfaces
  
- 
    
  
  11B-220.2 Point-of-sale devices
  Where point-of-sale devices are provided at check stands and sales and service counters, they shall comply with Section 11B-707.9.1, and shall also comply with Sections 11B-707.2 _|Clear Floor... 
- 
    
  
  F205.1 General
  Floor electrical receptacles shall not be required to comply with 309. 5. HVAC diffusers shall not be required to comply with 309. 6. ... 
- 
    
  
  1125B.3
  Clothes rods shall be a maximum of 54 inches (1372 mm) from the floor for a side approach (See Figure 11B-5D). ... 
- 
    
  
  205.1 General
  Floor electrical receptacles shall not be required to comply with 309. 5. HVAC diffusers shall not be required to comply with 309. 6.... 
- 
    
  
  Visual Busyness (slide 13)
  So I think what you have to do is use the contrast on the edges of things to tell you where the edge of the counter is, to tell you where the floor meets the wall, to tell you when something... 
- 
    
  
  Study Objectives
  Floor space needed for level, highest and lowest height transfers to seats without handhelds, with grab-bars, and with grab bars and a backrest d.... 
- 
    
  
  New construction and alteration requirements
  For example, installing a new display counter, moving walls in a sales area, replacing fixtures, carpet or flooring, and replacing an entry door.... 
- 
    
  
  224.7 Housing at a place of education
  Kitchens within housing units containing accessible sleeping rooms with mobility features (including suites and clustered sleeping rooms) or on floors containing accessible sleeping rooms... 
- 
    
  
  4.2 Physical Accessibility Barriers and Solutions
  and sign in Place sign check-in equipment on a side table or use a clipboard Install a lower countertop or lower a section of the existing counter Facility has two floors... 
- 
    
  
  Mounting Height
  Mounting Height ADAAG specifies a signal height 80 inches above the highest floor level within the space or 6 inches below the ceiling, whichever is lower.... 
- 
    
  
  Living Room
  High contrast between the seating, floor, and walls.... 
- 
    
  
  Door and Gate Hardware [§404.2.7]
  must: allow one-hand operation not require tight grasping, pinching, or twisting of the wrist operate with 5 lbf maximum be located 34” to 48” above the floor... 
- Panda TS.13 Aluminum/Wood Clad Thermally Broken Lift & Slide System
- Panda S.11 Aluminum/Wood Clad Lift & Slide System
- Smith System Trespa Planner Science Table 30″ Deep 11288
- Horton Automatics ICU/CCU Bi-Fold/Bi-Swing™ Door System
- 
    
  
  Dispersion: ADA Standard Section 233.3.5
  Section 233.3.5 covers scoping requirements in the current ADA Standards for dispersion of individual residential dwelling units. 
- 
    
  
  Design Opportunity
  27" AFF under the vanity top (306) while keeping the counter/rim at 34" AFF maximum (606.3); and it may require more than 8" minimum knee clearance to provide the extended depth clear floor... 
- 
    
  
  This is a great unit but it's not "recessed", it's semi-recessed.
  If you place this unit next to the accessible lavatory or other required clear space and don't allow room for the projection, it may interfere with the minimum required clear floor space... 
- 
    
  
  Non-Positive Shut-off
  Remember that the hose has to be at least 59" long so it would fall onto the floor of the tub if dropped. It's a plumbing safety requirement.... 
- Mannington Mills Boucle Collection Commercial Carpet
- Panda S.90 All Aluminum Slim Profile Multi-Slide Door System
- Panda TS.83 Thermally Broken Multi-Slide Door System
