mental impairment, and, to at least one of those individuals supervision of special diets or application of dressings, or provide for the administration of medication to residents, to the extent...
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
- Assisted Living Directory - Ohio Assisted Living Facilities & Senior Care
-
Caution regarding minimum Aisle Widths for aisles that serve "elements on both sides"
As a heads up, care should be taken in applying the technical aspects of 11B-403.5.1, Exception 4 re: minimum aisle width in California....
-
Compliance Dates for New Kiosk Orders and Airline/Airport Agreements
The Trace Center, recognizing that a longer lead time would likely be needed, suggested that the Department finalize the technical standard and provide it to interested parties while the...
- Braille Authority of North America (BANA)
-
Limited-Use/Limited-Application Elevators, Destination-Oriented Elevators and Private Residence Elevators
If a facility is exempt from the scoping requirement, but nonetheless installs an elevator, the 1991 Standards require the elevator to comply with the technical requirements for elevators...
-
11B-1009.5.6 Size
Each transfer step shall have a tread clear depth of 14 inches (356 mm) minimum and 17 inches (432 mm) maximum and shall have a tread clear width of 24 inches (610 mm) minimum....
-
604.8.3 Coat Hooks and Shelves
Shelves shall be located 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor. [ECTCR UFAS 4.25.3, Fig. 38, 4.23.9, 4.34.5.3(3)]...
-
1009.4.3 Wall Depth and Length
The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (405 mm) maximum....
-
504.2 Treads and Risers
Risers shall be 4 inches (100 mm) high minimum and 7 inches (180 mm) high maximum. Treads shall be 11 inches (280 mm) deep minimum....
-
803.5 Coat Hooks and Shelves
Shelves shall be 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground. [ECTCR UFAS 4.25.3, Fig. 38]...
-
5.4.4.2 Transfer Support Distance from Transfer Surface for Imaging Equipment
Supports (transfer or positioning) should be located 1 ½ inches maximum from the transfer surface....
-
R408.2 Treads and Risers
Risers shall be 100 mm (4 in) high minimum and 180 mm (7 in) high maximum. Treads shall be 280 mm (11 in) deep minimum....
-
C1-d
[ADA Standards § 4.3.8]    Yes    No Note: Level changes between 1/4 inch and 1/2 inch should be beveled (sloped) at 1:2 maximum....
-
R406.2 Unobstructed Forward Reach
Where a forward reach is unobstructed, the high forward reach shall be 1220 mm (4.0 ft) maximum and the low forward reach shall be 380 mm (1.25 ft) minimum above the finish surface....
-
Check-Out Areas [8.3]
Check-Out Areas [8.3] Check-out counters at accessible lanes are held to a maximum surface height of 36 inches....
-
505.4 Height
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces....
-
7.2 SERVICE COUNTERS
exceeding 36 in (915 mm) in height are provided for standing sales or distribution of goods to the public, an auxiliary counter or a portion of the main counter shall be provided with a maximum...
-
Public Sector (Government) Facilities
subject to title II of the ADA except those with no more than two stories where the inaccessible story above (or below) the entry level has no public use space and an occupant load of five maximum...
-
207 Accessible Means of Egress
All technical criteria for accessible means of egress (409), including areas of refuge (410) have been removed in the final rule....
- Inpro Corporation JointMaster® 787 Series Floor Expansion Joint Covers
- EZ-ACCESS Transitions® Modular Entry Ramp
- Haws AXION® MSR Barrier-Free Recessed Eye/Face Wash 7655WCC
- ADA Solutions, Inc. Surface Applied Truncated Dome Detectable Warning Systems