Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
Search Results "Work Surface"
-
11B-407.4.10.1 Location
-
Vanity Counter Space
Comparable vanity countertop space need not be one continuous surface and need not be exactly the same size as the countertops in comparable guest bathrooms....
-
11B-1008.2.3 Water play components
Where the surface of the accessible route, clear floor or ground spaces, or turning spaces serving water play components is submerged, compliance with Sections 11B-302 _|Floor or Ground...
-
4. COMMON PATH OF TRAVEL ITEMS
serving the area of alteration • Public telephones serving the area of alteration • Exterior or interior signs along the path of travel • Accessible route components • Walking surfaces...
-
1003.2.12.2 Opening limitations
From a height of 34 inches (864 mm) to 42 inches (1067 mm) above the adjacent walking surfaces, a sphere 8 inches (203 mm) in diameter shall not pass....
-
Elevated Dune Crossings
Locate handrails continuously along both sides of the dune crossing at a height of 34 inches (865 millimeters) to 38 inches (965 millimeters) above the walking surface....
-
Suggestion by Eldon Tipping
in Concrete Construction magazine, September 1998, Eldon Tipping made suggestions for a specification for sloped random - traffic floors such as parking decks, ramps, and other sloped surfaces...
-
§ 38.77(b)
Handrails shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than...
-
11B-1008.2.3 Water play components
Where the surface of the accessible route, clear floor or ground spaces, or turning spaces serving water play components is submerged, compliance with Sections 11B-302 _|Floor or Ground...
-
§ 38.155(a)
Handrails shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than...
-
11B-705.1.1.2 Dome spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 2.3 inches (58 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
Significant alternatives which minimize any significant economic impacts on small entities
analyzes the following four requirements in the proposed guidelines that will have more than minimal impacts on state and local transportation departments: Detectable warning surfaces...
-
4.3.2 Seat Height
4.3.2 Seat Height Seat height is an important dimension for establishing the height of built-in seating, toilet heights, tub heights, shower seat heights and other transfer related surfaces...
-
Characteristics of Study Participants
of community mobility is related to the “accessibility” of outdoor surfaces....
-
Fulton County - ADA Administrator
Organizes, prioritizes, and assigns work: prioritizes and schedules work activities in order to meet objectives; ensures that subordinates have the proper resources needed to complete the...
-
Robert Dupuy, IALD, LC. Problems and Solutions
Historic Basis for Lighting Criteria I think, first off, a little-known fact about the lighting levels that all of us use daily to do our work and that we also find in lighting codes...
-
Roberta Null, Ph.D., ASID. Training for Blind and Low Vision Persons: Color Contrast
Center for the Blind I did a lot of work years ago teaching kitchen design, and found out about the Center for the Blind in San Diego (slide 1), which was right off of our campus at...
-
Features of the ETA Standard Barrier Survey/Barrier Management System [Title II]
First, they miss important barriers that may become risk-management headaches in the future (such as floor-surface barriers to people with mobility impairments and protruding objects that...
-
2. There are a limited number of other employees available to perform the function, or among whom the function can be distributed
The heavy work flow during peak periods may make performance of each function essential, and limit an employer's flexibility to reassign a particular function....
-
11B-108 Maintenance of accessible features
A public accommodation shall maintain in operable working condition those features of facilities and equipment that are required to be accessible to and useable by persons with disabilities...
-
Comments on specific provisions of proposed ADAAG (Preamble, Section-by-Section Analysis)
Those areas that elicited the heaviest response included assistive listening systems, automated teller machines, work areas, parking, areas of refuge, telephones (scoping for TDD’s and volume...
-
May employers require employees to have periodic medical examinations?
(Question 18) No, with very limited exceptions for employees who work in positions affecting public safety, such as police officers, firefighters, or airline pilots....
-
When is an employer required to make a reasonable accommodation?
has HIV or AIDS, it may be sufficient for the employee to say that he or she has an illness or disability covered by the ADA, that the illness or disability causes certain problems with work...
-
11B-904.4 Sales and service counters
Exception: In alterations, when the provision of a counter complying with Section 11B-904.4 would result in a reduction of the number of existing counters at work stations or a reduction...