Call buttons shall be internally illuminated with a white light over the entire surface of the button. [2010 ADA Standards] 407.2.1.5 Signals....
Search Results "Recreational Surfacing"
Filters
Commonly Searched Documents
-
11B-407.2.1.5 Signals
-
11B-703.5.1 Finish and contrast
Additional factors affecting the ease with which the text can be distinguished from its background include shadows cast by lighting sources, surface glare, and the uniformity of the text...
-
11B-703.6.2 Finish and contrast
Additional factors affecting the ease with which the text can be distinguished from its background include shadows cast by lighting sources, surface glare, and the uniformity of the text...
-
Categorization of wheelchair versus other power-driven mobility devices. (Section-by-Section Analysis)
of categorization did so because of their concerns about potentially detrimental impacts on the environment and cultural and natural resources; on the enjoyment of the facility by other recreational...
-
The ADA and Department of Justice Regulations
accommodation (businesses that are generally open to the public and that fall into one of twelve categories listed in the ADA, such as restaurants, movie theaters, schools, day care facilities, recreational...
-
CASI Accessibility Construction Inspection Checklist
Items included to be inspected for compliance if provided, including but not limited to: outdoor developed areas, bus shelters, amusement rides, recreational boating facilities, fishing...
-
CALBO Accessibility Construction Inspection Checklist
Items included to be inspected for compliance if provided, including but not limited to: outdoor developed areas, bus shelters, amusement rides, recreational boating facilities, fishing...
-
Boarding Piers at Boat Launch Ramps
A boat launch ramp is a sloped surface designed for launching and retrieving trailered boats and other watercraft to and from a body of water....
-
Wooster Products Flexmaster Safety Tread
Inexpensive Easily replaceable Color coordinated surfaces available ADA approved Durable safety surface Glow-in-the-dark capability Longwearing, newly designed, heat treated...
-
Renewing the Commitment: An ADA Compliance Guide for Nonprofits
Nonprofits are committed to serving the needs of the community in a variety of areas: the arts, education, recreation, human services, health, advocacy, community development and housing...
-
Expert Report of Jeromy G. Murphy, American Construction Investigations, LTD (August 6, 2018)
Sidewalks & Walkways: The designated accessible route to the entrance has surface openings greater than 1/2 inch (1991 ADA Stds 4.3.6, 4.5.4; 2010 ADA Stds 403.2, 302.3)....
-
7.2 Technological and Scientific Considerations
Section 4.3.2, some types of current diagnostic imaging equipment present serious technical, scientific, and design impediments to improve accessibility of the height of machines’ transfer surfaces...
-
Guest Bathrooms
Covered sink pipes are required under bathroom sinks. 606.5 Exposed Pipes and Surfaces....
-
105 Referenced Standards
Society of Mechanical Engineers (ASME) for various elevators and platform lifts (105.2.2) American Society for Testing and Materials (ASTM) for use zones, play equipment, and accessible surfaces...
-
1133B.7.1
SECTION 1133B GENERAL ACCESSIBILITY FOR ENTRANCES, EXITS AND PATHS OF TRAVEL 1133B.7 Walks and sidewalks. 1133B.7.1 Continuous surface. ...
-
BACKGROUND
other medical settings.1 In response, the Access Board issued a notice of proposed rulemaking2 that, among other things, would specify a maximum lower adjustable height for the transfer surface...
-
Mary Ann Hay, IALD, LEED AP, Vice President, Director, Architectural Lighting Design, Syska Hennessy Group, Inc.
Light reflecting from highly reflective surfaces. Windows. Skylights....
-
11B-403.5.1 Clear width
Except as provided in Sections 11B-403.5.2 and 11B-403.5.3, the clear width of walking surfaces shall be 36 inches (914 mm) minimum. Exceptions: 1....
-
11B-403.5.1 Clear width
Except as provided in Sections 11B-403.5.2 and 11B-403.5.3, the clear width of walking surfaces shall be 36 inches (914 mm) minimum....
-
403.5.3 Passing Spaces
Passing spaces shall be either: a space 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum; or, an intersection of two walking surfaces providing a T-shaped space complying with...
-
502.6 Identification
Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [ECTCR UFAS 4.6.4] Advisory 502.6 Identification....
-
Accessible Routes
The accessible route must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level...
-
Accessible Routes
Accessible route requirements in ADAAG address width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level, doors, egress, and areas...
-
703.7.1 Finish and Contrast
Additional factors affecting the ease with which the text can be distinguished from its background include shadows cast by lighting sources, surface glare, and the uniformity of the text...
