or barrier shall be provided that prevents the passage of a 4-inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish floor or ground surface...
Search Results "Side Transfer Surface"
-
11B-405.9.2 Curb or barrier
-
11B-405.9.2 Curb or barrier
or barrier shall be provided that prevents the passage of a 4-inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish floor or ground surface...
-
11B-801.1 Scope
For example, Section 11B-806 addresses guest rooms in transient lodging facilities while Section 11B-902 contains the technical specifications for dining surfaces....
-
Slope : Intercept
I have designed a set of ramps that are about 3 feet square and perform as a modular set of objects: a low profile bit of geometry designed to nest and stack, to attach side-by-side, to...
-
806.2.3 Sleeping Areas
At least one sleeping area shall provide a clear floor space complying with 305 on both sides of a bed....
-
F232.5.1 Cubicles and Counters
At least 5 percent, but no fewer than one, of cubicles shall comply with 902 on both the visitor and detainee sides....
-
232.5.1 Cubicles and Counters
At least 5 percent, but no fewer than one, of cubicles shall comply with 902 on both the visitor and detainee sides....
-
11B-604.8.1.2 Doors
A door pull complying with Section 11B-404.2.7 shall be placed on both sides of the door near the latch....
-
Compartment Doors
Comments suggested that an alternate location in the side partition farthest from the water closet should be allowed, consistent with the original ADAAG....
-
502.3.4 Location
Access aisles shall be permitted to be placed on either side of the parking space except for angled van parking spaces which shall have access aisles located on the passenger side of the...
-
Scales
Accessible Scale 1.Sloped surface provides access to scale platform -- no abrupt level changes at floor or platform. 2.Edge protection at drop off. 3.Large platform to accommodates...
-
11B-604.8.1.2 Doors
A door pull complying with Section 11B-404.2.7 shall be placed on both sides of the door near the latch....
-
Best Practice Recommendations for Layout Planning
When possible, include both “horizontal” (side to side) and “vertical” (front to back) aisles to improve access and flow....
-
Pass Through Kitchen: ADA Standard Section 804.2.1
In pass through kitchens where counters, appliances or cabinets are on two opposing sides, or where counters, appliances or cabinets are opposite a parallel wall, clearance between all opposing...
-
11B-804.2.1 Pass through kitchen
In pass through kitchens where counters, appliances or cabinets are on two opposing sides, or where counters, appliances or cabinets are opposite a parallel wall, clearance between all opposing...
-
11B-804.2.1 Pass through kitchen
In pass through kitchens where counters, appliances or cabinets are on two opposing sides, or where counters, appliances or cabinets are opposite a parallel wall, clearance between all opposing...
-
Inclusion Solutions Model 2000 Voting Booth with Light (Hard Curtain)
Lightweight, 10/lb unit All components packaged in custom box Rugged blow molded lid and base Durable blow molded plastic side panels Easy-to-assemble...
-
Inclusion Solutions Model 2000 Voting Booth (Hard Curtain)
Lightweight, 10/lb unit All components packaged in custom box Rugged blow molded lid and base Durable blow molded plastic side panels Easy-to-assemble...
-
Sharing an Access Aisle
The proposed rule, consistent with the original ADAAG, allowed access aisles to be provided on either side of the parking space....
-
5.9.2.2 Standing Supports on Dual Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations
Rationale for the recommendation Users need to access either side of the ramp for entry....
-
Bus Shelter Benches
Don't you think that's because 903 benches are designed for wheelchair users to transfer onto them and that's not expected to be necessary at bus shelter benches? ...
-
11B-705.1.1.3.1
Detectable warning surfaces shall be yellow and approximate 33538 of SAE AMS-STD-595A....
-
11B-705.1.1.3.1
Detectable warning surfaces shall be yellow and approximate 33538 of SAE AMS-STD-595A....
-
406 Curb Ramps
These include specifications for running slope, surface, clear width, and wet conditions. Consistent with the scope of the guidelines, these requirements apply to facilities on sites....
