A pit toilet may be permanently installed or may be moved from one location to another as the pit is filled or the area becomes severely impacted from use. ...
Search Results "ALI: Automatic Location Identification"
Commonly Searched Documents
-
Pit Toilet
-
Attachment B
Element Identified in Attachments X, X, and X to the Consent Decree: Description of Element: Location of Element: ____________________ Date _________________________________...
-
11B-809.10.7.1 Floor space
Exception: The 48-inch (1219 mm) minimum clear width may be reduced to 36 inches (914 mm) minimum for lavatories, cabinets, wing walls, or privacy walls located immediately adjacent to a...
- AJW Architectural Products U117 12 oz. Bright Liquid Soap Dispenser - Surface Mounted
- Whitehall Mfg. WH2142T2 Ligature Resistant Toilet Top Supply On-Floor Wall Waste
- Neo-Metro Metaal Toilet Configured for In-Wall Flushing System
- Corbin Russwin Inc. FE6700 Storm Shutter Multi-Point Latching System
- Neo-Metro Euro-Urban Toilet Configured for In-Wall Flushing System
-
11B-232.1 General
providing the required mobility features in substitute cells (cells other than those where alterations are originally planned), provided that each substitute cell— i) Is located...
-
Transfer Devices for Use with Amusement Rides: ADA Standard Section 1002.6
Where possible, designers are encouraged to locate the transfer device seat no higher than 17 to 19 inches 430 to 485 mm) above the load and unload surface....
-
Outdoor Developed Areas: ADA Standard Section 9.
Review the updated information on the revisions to the ADA Standards regarding outdoor developed areas.
-
11B-1002.6 Transfer devices for use with amusement rides
Where possible, designers are encouraged to locate the transfer device seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
11B-233.3.1.2.6.1 Single building with one common (lobby) entrance
The following may only be used for determining required access to multifamily dwelling units, in a single building with one common (lobby) entrance, located on a site with difficult terrain...
-
1013.4 Raised character and braille exit signs
Tactile exit signs shall be required at the following locations: 1....
-
11B-809.10.7.3 Reinforcement for grab bars
Where the water closet is located adjacent to lavatories, cabinets, wing walls, or privacy walls the grab bar reinforcement shall be 36 inches (914 mm) in length....
-
1010.2.13.1 Delayed egress locking system
A sign shall be provided on the door and shall be located above and within 12 inches (305 mm) of the door exit hardware: 6.3....
- How to File a Charge of Employment Discrimination
-
11B-410.1 General
Accessibility scoping requirements for elevators and lifts are located in Sections 11B-206.6 and 11B-206.7; technical requirements are located in Sections 11B-407, 11B-408, 11B-409 and 11B...
-
Door Maneuvering Clearance
The exception, located at section 404.2.4 in the final rule, remains generally applicable to entry doors serving hospital patient rooms....
-
Plan 4B: 13-Foot Wide Accessible Guest Room
inches wide (section 608.2.3); • Alternate roll-in shower has a 36-inch wide entry at one end of the long end of the compartment (section 608.2.3); • Recessed alternate roll-in shower location...
-
Plan 1A: 13-Foot Wide Accessible Guest Room
(section 607.2); • Recessed bathtub location permits shorter rear grab bar at water closet (section 604.5.2); • Circular turning space in room (section 603.2.1); • Required clear...
-
Plan 1B: 13-Foot Wide Accessible Guest Room
(section 607.2); • Recessed bathtub location permits shorter rear grab bar at water closet (section 604.5.2); • Circular turning space in room (section 603.2.1); • Required clear...